ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่

Argon: Air Led over Calcium Carbide and Calcium Chloride at 800 °C (Fischer and Ringe, Thorpe 1912)
Air is nearly 1 % argon. Red-hot calcium carbide with a little calcium chloride swallows both the oxygen and the nitrogen; argon, which combines with nothing, passes straight through.
Result: about 11 litres of argon from 7 kg of carbide in two days. It still holds traces of neon, krypton and xenon (0.25 %, mostly neon).
Source: Thorpe, Dictionary of Applied Chemistry vol. 1 (1912), p. 291, after Fischer and Ringe (Ber. 41, 2017). Not given: the vessel, the air volume, and how the water and carbon dioxide are taken out. Picture drawn by Youblob.
ขั้นสูง
2 days
คำแนะนำ
1
1
Mix the absorbent
Mix the absorbent
Mix calcium carbide (90 %) with calcium chloride (10 %): 7 kg carbide takes about 0.78 kg chloride (our arithmetic). Fill a tube with it. Ours: a porcelain tube in a tube furnace.
เครื่องมือที่ต้องใช้:
แคลเซียมคาร์ไบด์
แคลเซียมคลอไรด์
หลอดพอร์ซเลน
เตาเผาแบบท่อ2
2
Drive off volatile matter
Drive off volatile matter
Heat the mixture under reduced pressure first, to drive off anything volatile.
เครื่องมือที่ต้องใช้:
ปั๊มสุญญากาศ
เตาเผาแบบท่อ3
3
Lead air over it at 800 °C
Lead air over it at 800 °C
Hold the mixture at 800 °C and lead air over it slowly. The oxygen and nitrogen are taken up; what comes out is mostly argon. Ours: draw the air through with an aspirator.
วัสดุสำหรับขั้นตอนนี้:
อากาศในบรรยากาศ - โลก1 as requiredเครื่องมือที่ต้องใช้:
ไพโรมิเตอร์
แอสไพเรเตอร์
เตาเผาแบบท่อ4
4
Burn the traces over hot copper oxide
Burn the traces over hot copper oxide
Lead the gas over hot copper oxide. It burns any hydrogen, hydrocarbons and carbon monoxide.
เครื่องมือที่ต้องใช้:
คอปเปอร์ออกไซด์
หลอดพอร์ซเลน
เตาเผาแบบท่อ5
5
Take out water and carbon dioxide
Take out water and carbon dioxide
Remove the water vapour and carbon dioxide. Ours: soda lime for the carbon dioxide, then phosphorus pentoxide for the water.
เครื่องมือที่ต้องใช้:
โซดาไลม์ (สารดูดซับ CO2)
ฟอสฟอรัสเพนทอกไซด์
ขวดล้างแก๊ส6
6
Collect the argon
Collect the argon
Collect the gas. Expect about 11 litres in two days from 7 kg of carbide. Ours: over water in gas jars.
เครื่องมือที่ต้องใช้:
อ่างนิวแมติกพร้อมขวดเก็บแก๊สวัสดุ
1- 1 as requiredตัวยึดตำแหน่ง
เครื่องมือที่จำเป็น
12- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- 1 vendor sell this, none ship to you yetตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
พิมพ์เขียวนี้สร้าง
บลูพริ้นท์ที่เกี่ยวข้อง
บลูพริ้นท์เหล่านี้แบ่งปันความรู้ — เทคนิค วัสดุ หรือหลักการ
CC0 สาธารณสมบัติ
พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต
สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้


