การทำงานร่วมกัน
ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่
Aspirator: a Vessel of Water with a Tap at the Bottom (Sutton, 1904)
Charlie

สร้างโดย

Charlie

4. พฤศจิกายน 2026DE
15
0
0
0
0

Aspirator: a Vessel of Water with a Tap at the Bottom (Sutton, 1904)

The simplest aspirator: a closed vessel of known volume, full of water, with a tap at the bottom. As the water runs out it draws gas in through the apparatus attached to it, and the volume of water run out is the volume of gas drawn through. Result: an aspirator that draws a measured volume of gas, for example 1/10 cubic foot, through an absorber at a steady rate. Source: F. Sutton, A Systematic Handbook of Volumetric Analysis (1904), pp. 581-582. Unknown: the vessel's material and the tap. Picture: p. 581 of the book.
เริ่มต้น
Unknown

คำแนะนำ

1

Fit the vessel

Take a vessel of known volume, for example exactly 1/10 cubic foot, and fix a tap at its bottom. Close its mouth tightly with a cork carrying a glass tube, which connects to the absorber the gas is to pass through. Ours: a large clear glass bottle. Not given: the vessel's material, the tap.

วัสดุสำหรับขั้นตอนนี้:

ขวดแก้ว (ใส)ขวดแก้ว (ใส)1 aspirator vessel
วาล์วที่ไม่ทราบวาล์วที่ไม่ทราบ1 bottom tap
จุกไม้ก๊อกจุกไม้ก๊อก1 stopper
หลอดแก้วหลอดแก้ว1 inlet tube

เครื่องมือที่ต้องใช้:

หัวเป่าแก้วตั้งโต๊ะหัวเป่าแก้วตั้งโต๊ะ
ขนาดที่ไม่ทราบขนาดที่ไม่ทราบ
2

Set the flow and draw the gas

Fill the vessel with water, connect the absorber, check that everything is tight, and open the tap partly: the small outflow of water draws the gas through the absorber. For an even rate, fit about a yard of tubing to the outlet, for a steady head, ending in a fine jet tried beforehand to give the time wanted; used reversed, the jet clogs less. When the vessel is empty the gas stops, and the water run out measures the gas passed. Collect and measure the water if the vessel is not of fixed volume.

วัสดุสำหรับขั้นตอนนี้:

ท่อยางท่อยาง1 outlet tubing
หลอดแก้วหลอดแก้ว1 jet

เครื่องมือที่ต้องใช้:

กระบอกตวงมีขีดบอกกระบอกตวงมีขีดบอก

วัสดุ

5
  • ตัวยึดตำแหน่ง
  • ตัวยึดตำแหน่ง
  • ตัวยึดตำแหน่ง
  • ตัวยึดตำแหน่ง
  • 1 outlet tubing
    ตัวยึดตำแหน่ง

เครื่องมือที่จำเป็น

3

CC0 สาธารณสมบัติ

พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต

สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้

การสนทนา

(0)

เข้าสู่ระบบ เพื่อร่วมการสนทนา

กำลังโหลดความคิดเห็น...