การทำงานร่วมกัน
ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่

Barrel-Stave Hammock: Notched Staves Held by Ropes Twined Round Their Ends (Boy Mechanic, 1913)
A hammock of barrel staves, "more comfortable than one would think", from The Boy Mechanic (1913): smooth staves notched at the ends and strung side by side on ropes, which are gathered and tied to two trees. It can be left out in the rain.
The book gives no sizes: the length of the staves sets the width of the bed.
เริ่มต้น
About 2 hours
คำแนะนำ
1
1
Read The Boy Mechanic
Read The Boy Mechanic
"A hammock made of barrel staves is more comfortable than one would think, considering the nature of the material employed in making it."
2
2
Choose and smooth the staves
Choose and smooth the staves
Select good, smooth barrel staves, enough laid side by side to make the hammock as long as you are tall (our rule). Sandpaper them thoroughly; he says this makes a great improvement.
วัสดุสำหรับขั้นตอนนี้:
แผ่นไม้ถังไม้12 ชิ้น
กระดาษทราย1 ชิ้น3
3
Notch the ends
Notch the ends
Cut half circles out of the edges of each stave near both ends, as at AA in his drawing, so the ropes lie in them. Mark them at the same place on every stave so the staves line up. Boring a hole on the edge line and sawing it in half is our way of cutting them.
เครื่องมือที่ต้องใช้:
ดินสอ
สว่านมือหมุนพร้อมดอก
เลื่อยมือ4
4
String the staves
String the staves
Lay the staves side by side and pass the ropes round their ends through the notches, twining them between the staves as at B, at both ends. The weight then hangs on four ropes at each end, so small ropes such as clothes lines will do.
วัสดุสำหรับขั้นตอนนี้:
ราวตากผ้า1 ชิ้น5
5
Hang it
Hang it
Gather the ropes at each end and tie them round two trees or posts, leaving the hammock a little slack so the bed curves as in the drawing.
วัสดุสำหรับขั้นตอนนี้:
ราวตากผ้า1 ชิ้น6
6
Troubleshooting
Troubleshooting
Hammock troubleshooting.
Flow
Loading...
7
7
History and honest limits
History and honest limits
From **The Boy Mechanic**, edited by H. H. Windsor, Popular Mechanics, Chicago, 1913, p. 75, "Barrel-Stave Hammock", sent in by H.G.M. of St. Louis (Project Gutenberg 12655). He gives no sizes or number of staves; the count, the length rule and the way of cutting the notches are ours.
วัสดุ
3- 12 ชิ้นตัวยึดตำแหน่ง
- 1 ชิ้นตัวยึดตำแหน่ง
- 1 ชิ้นตัวยึดตำแหน่ง
พิมพ์เขียวนี้สร้าง
บลูพริ้นท์ที่เกี่ยวข้อง
บลูพริ้นท์เหล่านี้แบ่งปันความรู้ — เทคนิค วัสดุ หรือหลักการ
CC0 สาธารณสมบัติ
พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต
สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้


