การทำงานร่วมกัน
ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่

Cartridge Belt: Wide Leather Belt With a Woven Strip Forming the Loops (Boy Mechanic, 1915)
Robert Pound of Lavina, Montana, sent this cartridge belt to The Boy Mechanic, Book 2 (1915): a leather belt about 2-1/2 in wide with a 1 in strip woven through pairs of slits to form a row of loops. Using the strip's free end in the buckle lets the loops be tightened for different sizes.
เริ่มต้น
About 2 hours
คำแนะนำ
1
1
His sizes, and how many loops
His sizes, and how many loops
กำลังโหลดสมุด Jupyter…
2
2
Read The Boy Mechanic, Book 2
Read The Boy Mechanic, Book 2
"Procure a leather belt, about 2-1/2 in. wide and long enough to reach about the waist, also a piece of leather, 1 in. wide and twice as long as the belt."
3
3
Cut the belt and strip
Cut the belt and strip
Cut a leather belt about 2-1/2 in wide and long enough to go round the waist, and a strip 1 in wide and twice as long as the belt. Fix a buckle to one end of the belt and rivet one end of the strip to the belt near the buckle.
วัสดุสำหรับขั้นตอนนี้:
หนังทำเครื่องม้า2 ชิ้น
หัวเข็มขัดเหล็กมีลิ้น1 ชิ้น
หมุดย้ำทองแดง1 ชิ้นเครื่องมือที่ต้องใช้:
มีดตัดหนัง
เครื่องเจาะรูหนัง
ค้อน
ตลับเมตร4
4
Weave the loops
Weave the loops
Cut two slits in the belt, a cartridge's diameter apart. Pass the strip through one slit and back through the other to make a loop. About 1/4 in further on, cut two more slits and form the next loop the same way, and so on along the whole belt.
เครื่องมือที่ต้องใช้:
มีดตัดหนัง
ตลับเมตร
ดินสอ5
5
Finish the end
Finish the end
Rivet the end of the strip to the belt, or take it into the buckle: then the strip can be drawn up to fit cartridges of different sizes. Punch the holes for the buckle tongue.
วัสดุสำหรับขั้นตอนนี้:
หมุดย้ำทองแดง1 ชิ้นเครื่องมือที่ต้องใช้:
เครื่องเจาะรูหนัง
ค้อน6
6
Troubleshooting
Troubleshooting
Cartridge belt troubleshooting.
Flow
Loading...
7
7
History and honest limits
History and honest limits
From "How to Make a Cartridge Belt" by Robert Pound, Lavina, Mont., in **The Boy Mechanic, Book 2**, Popular Mechanics, 1915 (Project Gutenberg 44585; checked on the archive.org scan boymechanicbook200chic2, p. 55). He gives no slit length and no cartridge size; the slit spacing follows whatever cartridge the belt is for. The tools and metric figures are ours.
วัสดุ
3- 2 ชิ้นตัวยึดตำแหน่ง
- 1 ชิ้นตัวยึดตำแหน่ง
- 1 ชิ้นตัวยึดตำแหน่ง
พิมพ์เขียวนี้สร้าง
บลูพริ้นท์ที่เกี่ยวข้อง
บลูพริ้นท์เหล่านี้แบ่งปันความรู้ — เทคนิค วัสดุ หรือหลักการ
CC0 สาธารณสมบัติ
พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต
สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้

