ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่
Butyraldehyde: Butyl Alcohol Dehydrogenated over Copper Pellets at 400-680 °F (Hasche, Eastman, US 2,173,111)
Charlie

สร้างโดย

Charlie

31. ตุลาคม 2026DE
10
0
0
0
0

Butyraldehyde: Butyl Alcohol Dehydrogenated over Copper Pellets at 400-680 °F (Hasche, Eastman, US 2,173,111)

Hot copper pulls two hydrogen atoms off butyl alcohol and leaves butyraldehyde. Hasche's catalyst is copper made from blown, water-quenched cuprous oxide, in dust-free pellets that can be burnt clean and reduced again when they tire. Result: butyraldehyde, distilled off from the unchanged alcohol. Source: Hasche, US 2,173,111 (Eastman Kodak, 1939), claims 6, 9 and 12. His worked run is for propyl alcohol; conversion for butanol is not given. Picture drawn by Youblob.
ขั้นสูง
1 day

คำแนะนำ

1

Pack the copper catalyst

Fill a tube with dust-free copper pellets made from cuprous oxide blown from molten copper and quenched in water (2-5 mesh in claim 17).

เครื่องมือที่ต้องใช้:

เม็ดตัวเร่งทองแดงเม็ดตัวเร่งทองแดง
เตาเผาแบบท่อเตาเผาแบบท่อ
2

Preheat the butyl alcohol

Vaporise and preheat the butyl alcohol to about 500-600 °F.

วัสดุสำหรับขั้นตอนนี้:

n-บิวทานอลn-บิวทานอล1 as required

เครื่องมือที่ต้องใช้:

เตาเผาแบบท่อเตาเผาแบบท่อ
3

Pass it over the copper at 400-680 °F

Lead the hot vapour over the catalyst held at about 400-680 °F. It splits into butyraldehyde and hydrogen; part of the alcohol passes unchanged.

เครื่องมือที่ต้องใช้:

เม็ดตัวเร่งทองแดงเม็ดตัวเร่งทองแดง
เตาเผาแบบท่อเตาเผาแบบท่อ
ขดท่อคอนเดนเซอร์ขดท่อคอนเดนเซอร์
4

Distil off the aldehyde

Condense the products and distil: butyraldehyde comes over first (it boils near 74 °C); distil the alcohol back in the presence of alkali and return it.

เครื่องมือที่ต้องใช้:

หม้อกลั่นลำดับส่วนหม้อกลั่นลำดับส่วน
โซเดียมไฮดรอกไซด์ สารละลาย 10 %โซเดียมไฮดรอกไซด์ สารละลาย 10 %
5

Reactivate the spent copper

When the catalyst slows, flush it, oxidise it at about 600-800 °F, cool, and reduce it again with alcohol vapour at about 300-400 °F.

เครื่องมือที่ต้องใช้:

เม็ดตัวเร่งทองแดงเม็ดตัวเร่งทองแดง
เตาเผาแบบท่อเตาเผาแบบท่อ

วัสดุ

1
  • ตัวยึดตำแหน่ง

เครื่องมือที่จำเป็น

5

บลูพริ้นท์ที่เกี่ยวข้อง

บลูพริ้นท์เหล่านี้แบ่งปันความรู้ — เทคนิค วัสดุ หรือหลักการ

CC0 สาธารณสมบัติ

พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต

สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้

การสนทนา

(0)

เข้าสู่ระบบ เพื่อร่วมการสนทนา

กำลังโหลดความคิดเห็น...