การทำงานร่วมกัน
ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่
Coloured Glass Sheets: Beech-Ash Glass Blown into Cylinders and Flattened (Theophilus, tr. Hendrie 1847)
Bubbles

สร้างโดย

Bubbles

4. พฤศจิกายน 2026IT
7
0
0
0
0

Coloured Glass Sheets: Beech-Ash Glass Blown into Cylinders and Flattened (Theophilus, tr. Hendrie 1847)

Window glass as the monk Theophilus taught it around 1100: two parts beech ash to one of clean sand, fritted for a night and a day, melted overnight in clay pots, blown into long bladders, opened into cylinders, split and flattened in a second oven, and cooled standing upright. White glass comes first. A pot that turns yellow gives light yellow if heated to the third hour and reddish yellow by the sixth; a pot that turns flesh-coloured gives light purple after two more hours and red purple by the sixth. Source: Theophilus, De Diversis Artibus, Book II, tr. R. Hendrie (1847), pp. 119-129. Picture: p. 127.
ขั้นสูง
2-3 days

คำแนะนำ

1

Make the beech ash

Cut beech-wood logs and dry them. Burn them together in a clean spot and collect the ashes, taking care that no earth gets mixed in.

วัสดุสำหรับขั้นตอนนี้:

ท่อนไม้เนื้อแข็ง (โอ๊ก เมเปิล บีช)ท่อนไม้เนื้อแข็ง (โอ๊ก เมเปิล บีช)1 beech

เครื่องมือที่ต้องใช้:

เกรียงก่อเกรียงก่อ
2

Frit the ash and sand

Mix two parts of ash with one part of sand washed free of earth and stones. Heat it on the upper hearth of the furnace for a night and a day, stirring it with an iron trowel as it warms so that it does not melt into a lump.

วัสดุสำหรับขั้นตอนนี้:

ทรายควอตซ์ทรายควอตซ์1 1 part to 2 of ash

เครื่องมือที่ต้องใช้:

เตาหลอมแก้วที่ขึ้นถึง 1100 องศาเซลเซียสเตาหลอมแก้วที่ขึ้นถึง 1100 องศาเซลเซียส
เกรียงก่อเกรียงก่อ
3

Make the pots and melt

Grind dry white clay, wet it, beat it hard with wood and make pots wide at the top and narrow below, with a small lip curved inward. Set the dry pots in the glowing furnace, fill them in the evening with the hot frit and feed dry wood all night until the glass is fully melted.

เครื่องมือที่ต้องใช้:

ผงดินขาวเคโอลินผงดินขาวเคโอลิน
เตาหลอมแก้วที่ขึ้นถึง 1100 องศาเซลเซียสเตาหลอมแก้วที่ขึ้นถึง 1100 องศาเซลเซียส
คีมช่างตีเหล็กคีมช่างตีเหล็ก
เกรียงก่อเกรียงก่อ
4

Blow the cylinders

In the morning gather glass on the iron pipe (two yards long, a thumb thick), blow a little, tap it on a flat stone so it hangs evenly, and blow it into a long bladder. Melt open the far end in the flame and widen it with a piece of wood, break it off the pipe with a wet piece of wood, open the other end the same way, and let a boy carry the cylinder on a stick to the warm cooling oven. This first glass is pure and white.

เครื่องมือที่ต้องใช้:

ท่อเป่าแก้วท่อเป่าแก้ว
เตาหลอมแก้วที่ขึ้นถึง 1100 องศาเซลเซียสเตาหลอมแก้วที่ขึ้นถึง 1100 องศาเซลเซียส
เตาอบอ่อนเตาอบอ่อน
5

Bring out the colours

If a pot turns yellow, heat it to the third hour for light yellow or to the sixth for reddish yellow. If a pot turns tawny like flesh, keep some for flesh tints; heat the rest from the first to the third hour for light purple, from the third to the sixth for a red purple. Blow cylinders from each as before.

เครื่องมือที่ต้องใช้:

เตาหลอมแก้วที่ขึ้นถึง 1100 องศาเซลเซียสเตาหลอมแก้วที่ขึ้นถึง 1100 องศาเซลเซียส
ท่อเป่าแก้วท่อเป่าแก้ว
6

Split and flatten

When all are made and cooled, fire the flattening oven. Split each cylinder along one side with a hot iron, lay it on the glowing hearth, and when it softens open it with the pincers and a smooth piece of wood and flatten it. Stand the sheets upright against the wall of the warm cooling oven, one next to another. When cold, cut them into pieces for windows.

เครื่องมือที่ต้องใช้:

เตาหลอมแก้วที่ขึ้นถึง 1100 องศาเซลเซียสเตาหลอมแก้วที่ขึ้นถึง 1100 องศาเซลเซียส
คีมช่างตีเหล็กคีมช่างตีเหล็ก
เตาอบอ่อนเตาอบอ่อน

วัสดุ

2

เครื่องมือที่จำเป็น

6

พิมพ์เขียวนี้สร้าง

CC0 สาธารณสมบัติ

พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต

สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้

การสนทนา

(0)

เข้าสู่ระบบ เพื่อร่วมการสนทนา

กำลังโหลดความคิดเห็น...