การทำงานร่วมกัน
ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่
Steel-Laid Axe and Hatchet: Iron Folded Round a Mandrel, Shear Steel Welded Between the Leaves (Edwinson, 1886)
Forge

สร้างโดย

Forge

14. พฤศจิกายน 2026NO
10
0
0
0
0

Steel-Laid Axe and Hatchet: Iron Folded Round a Mandrel, Shear Steel Welded Between the Leaves (Edwinson, 1886)

How axes and hatchets were made of iron and shear steel, from George Edwinson's smithing series (Amateur Work, 1886): a flat iron bar folded round a tapering mandrel to make the eye, the leaves welded, and a thin slice of steel welded between them so the ground edge is always steel.
ขั้นสูง
A day at the forge

คำแนะนำ

1

Read Edwinson

"By this means a layer of steel is enclosed between two layers of iron, and a steel edge is always ensured to the tool."
2

Fold the eye

Take flat iron of the width and thickness you want, twice the length of the blade. Heat it and bend it over a tapering mandrel the same section as the handle (his fig. 225).

วัสดุสำหรับขั้นตอนนี้:

แท่งเหล็กดัดแท่งเหล็กดัด1 ชิ้น

เครื่องมือที่ต้องใช้:

เตาตีเหล็กของช่างตีเหล็กเตาตีเหล็กของช่างตีเหล็ก
ทั่งทั่ง
ค้อนปอนด์ค้อนปอนด์
คีมช่างตีเหล็กคีมช่างตีเหล็ก
เหล็กขยายรูเหล็กขยายรู
3

Close and shape the eye

Weld the two leaves together where they meet near the eye. Reheat and forge the eye to shape on the mandrel, then drive the mandrel in the other way to open the inner edge of the eye slightly.

วัสดุสำหรับขั้นตอนนี้:

ผงบอแรกซ์ผงบอแรกซ์1 ชิ้น

เครื่องมือที่ต้องใช้:

เตาตีเหล็กของช่างตีเหล็กเตาตีเหล็กของช่างตีเหล็ก
ทั่งทั่ง
ค้อนค้อน
เหล็กขยายรูเหล็กขยายรู
4

Lay in the steel

Put a thin slice of shear steel, as wide as the axe, between the two leaves. Bring both to a welding heat and forge them down together to the thickness and width wanted.

วัสดุสำหรับขั้นตอนนี้:

แผ่นเหล็กกล้าเชียร์แผ่นเหล็กกล้าเชียร์1 ชิ้น
ผงบอแรกซ์ผงบอแรกซ์1 ชิ้น

เครื่องมือที่ต้องใช้:

เตาตีเหล็กของช่างตีเหล็กเตาตีเหล็กของช่างตีเหล็ก
ทั่งทั่ง
ค้อนปอนด์ค้อนปอนด์
คีมช่างตีเหล็กคีมช่างตีเหล็ก
5

Hatchet hammer (variant)

For a carpenter's hatchet (fig. 223) weld a rectangular piece of steel to the back of the eye and forge it down with it as the hammer. The miner's hatchet (fig. 224) has a massive ear, a bar-steel hammer and a slit in the blade for drawing nails. Do not make a woodman's axe square-headed: men drive wedges with the back and spoil it.

วัสดุสำหรับขั้นตอนนี้:

เหล็กกล้าเบ้าหลอมเหล็กกล้าเบ้าหลอม1 ชิ้น

เครื่องมือที่ต้องใช้:

เตาตีเหล็กของช่างตีเหล็กเตาตีเหล็กของช่างตีเหล็ก
ทั่งทั่ง
ค้อนค้อน
สกัดร้อนสกัดร้อน
6

Pare and smooth

Pare the rough forging to shape with hot chisels (his setts) while hot. Hammer the sides well at a low red heat until smooth.

เครื่องมือที่ต้องใช้:

เตาตีเหล็กของช่างตีเหล็กเตาตีเหล็กของช่างตีเหล็ก
สกัดร้อนสกัดร้อน
ทั่งทั่ง
ค้อนค้อน
7

Harden, temper and grind

Harden and temper the blade, then grind it on a grindstone to sharpen the edge and polish the blade.

เครื่องมือที่ต้องใช้:

เตาตีเหล็กของช่างตีเหล็กเตาตีเหล็กของช่างตีเหล็ก
ถังชุบน้ำถังชุบน้ำ
หินลับแบบหมุนหินลับแบบหมุน
8

Hang the head (ours)

He does not cover the handle. Ours: fit a hickory handle blank to the eye and wedge it.

วัสดุสำหรับขั้นตอนนี้:

ท่อนไม้ทำด้ามขวาน (ฮิกกอรี)ท่อนไม้ทำด้ามขวาน (ฮิกกอรี)1 ชิ้น
ลิ่มไม้ลิ่มไม้1 ชิ้น

เครื่องมือที่ต้องใช้:

มีดสองมือมีดสองมือ
ค้อนค้อน
9

Troubleshooting

Axe troubleshooting.

Flow

Loading...
10

History and honest limits

From George Edwinson, "Smithing and Forging" (part X), **Amateur Work, Illustrated**, vol. VI (Ward, Lock & Co., 1886-87), pp. 211-214 (checked on the archive.org scan amateurworkillus06lond), p. 212 and figs. 222-225. He gives no temper colour for axes, no sizes and no handle: those are ours.

วัสดุ

6

เครื่องมือที่จำเป็น

10

บลูพริ้นท์ที่เกี่ยวข้อง

บลูพริ้นท์เหล่านี้แบ่งปันความรู้ — เทคนิค วัสดุ หรือหลักการ

CC0 สาธารณสมบัติ

พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต

สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้

การสนทนา

(0)

เข้าสู่ระบบ เพื่อร่วมการสนทนา

กำลังโหลดความคิดเห็น...