ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่
Ferroboron: Colemanite Reduced by Ferrosilicon above 2000 °C in an Arc Furnace (Hansen, GE, US 982,135, 1911)
Charlie

สร้างโดย

Charlie

31. ตุลาคม 2026DE
7
0
0
0
0

Ferroboron: Colemanite Reduced by Ferrosilicon above 2000 °C in an Arc Furnace (Hansen, GE, US 982,135, 1911)

Ferroboron should carry little carbon, so Hansen reduced the boron mineral colemanite with silicon instead of coke. The silicon takes the oxygen, joins the lime as a calcium silicate slag, and the boron goes into the iron of the ferrosilicon. Result: ferroboron, low in carbon, under a clean slag. Source: Hansen, US 982,135 (1911). Not given: weights, boron content. Picture drawn by Youblob.
ขั้นสูง
1 day

คำแนะนำ

1

Dehydrate the colemanite at 450 °C

Heat colemanite to about 450 °C in a suitable container to drive off its water.

วัสดุสำหรับขั้นตอนนี้:

โคลแมไนต์โคลแมไนต์1 as required

เครื่องมือที่ต้องใช้:

เตาเผามัฟเฟิลเตาเผามัฟเฟิล
2

Powder and mix with ferrosilicon

Grind it and mix with powdered ferrosilicon: enough silicon to reduce all the boron and slag off the lime. The amount depends on the silicon content of the ferrosilicon.

วัสดุสำหรับขั้นตอนนี้:

เฟอร์โรซิลิคอนเฟอร์โรซิลิคอน1 as required

เครื่องมือที่ต้องใช้:

ครกและสากครกและสาก
3

Bind and press into pellets

Mix the powder with a binder, e.g. water glass, and press it into pellets.

เครื่องมือที่ต้องใช้:

น้ำแก้ว (สารละลายโซเดียมซิลิเกต)น้ำแก้ว (สารละลายโซเดียมซิลิเกต)
เครื่องอัดผงเป็นเม็ดเครื่องอัดผงเป็นเม็ด
4

Reduce above 2000 °C

Heat the pellets above 2000 °C, e.g. in a Moissan arc furnace (a ferrosilicon-type resistance furnace also works). Silicon reduces the boron; the calcium silicate slag separates cleanly from the ferroboron.

เครื่องมือที่ต้องใช้:

เตาอาร์กไฟฟ้าเตาอาร์กไฟฟ้า

วัสดุ

2

เครื่องมือที่จำเป็น

5

CC0 สาธารณสมบัติ

พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต

สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้

การสนทนา

(0)

เข้าสู่ระบบ เพื่อร่วมการสนทนา

กำลังโหลดความคิดเห็น...