ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่
Gasoline by Pressure Cracking: Heavy Residue Distilled at 650-850 °F under 4-5 Atmospheres (Burton, US 1,049,667)
Charlie

สร้างโดย

Charlie

29. ตุลาคม 2026DE
1
0
0
0
0

Gasoline by Pressure Cracking: Heavy Residue Distilled at 650-850 °F under 4-5 Atmospheres (Burton, US 1,049,667)

Straight distillation leaves most of a barrel of crude as heavy oil. Burton's 1913 patent turns that residue into gasoline: distil it hot while its own vapour is held at 4 to 5 atmospheres, all the way through the condenser. The heat and pressure break the heavy oil into light oil. Cracked gasoline is the first rung toward high-octane fuel. Feed: the fuel-oil and gas-oil residue left after the light cuts, boiling at about 600 to 700 °F (claim: above 500 °F). Source: W. M. Burton, US 1,049,667 (1913), assigned to Standard Oil (Indiana). Not given: charge size, run time, yield. Burton claims the gasoline stays in the paraffin series; that is his claim. A fired still under pressure needs a working safety valve. Picture: the patent drawing.
ผู้เชี่ยวชาญ
2 days

คำแนะนำ

1

Fill the pressure still with residue

The still is a closed, boiler-like holder over a fire chamber, with a safety valve, a pressure gauge, and a thermometer in an oil-filled tube slanting into it. Fill it with the heavy residue left after the gasoline and illuminating oils have been distilled off.

วัสดุสำหรับขั้นตอนนี้:

กากปิโตรเลียมกากปิโตรเลียม1 still charge

เครื่องมือที่ต้องใช้:

หม้อกลั่นความดันหม้อกลั่นความดัน
เกจวัดความดันเกจวัดความดัน
เทอร์โมมิเตอร์เทอร์โมมิเตอร์
2

Close the outlet and fire it

A pipe rises from the top of the still to a water-cooled condenser coil, then runs to a receiver tank. Keep the shut-off valve after the coil closed and fire the still. The vapours build up 4 to 5 atmospheres on the liquid, and its boiling point rises from 500-600 °F to 750-800 °F.

เครื่องมือที่ต้องใช้:

หม้อกลั่นความดันหม้อกลั่นความดัน
ขดท่อคอนเดนเซอร์ขดท่อคอนเดนเซอร์
น้ำน้ำ
เกจวัดความดันเกจวัดความดัน
3

Distil at 650 to 850 °F under pressure

Distil at about 650 to 850 °F. Keep the pressure on the vapours the whole way, in the still and while they condense in the coil. The heat and pressure turn the heavy oil into low-boiling oil.

เครื่องมือที่ต้องใช้:

หม้อกลั่นความดันหม้อกลั่นความดัน
เทอร์โมมิเตอร์เทอร์โมมิเตอร์
เกจวัดความดันเกจวัดความดัน
4

Draw off the gasoline from time to time

Open the shut-off valve now and then to run the condensed gasoline into the receiver. Do it often enough that the coil never fills with liquid.

เครื่องมือที่ต้องใช้:

ขดท่อคอนเดนเซอร์ขดท่อคอนเดนเซอร์
ถังเก็บน้ำมันถังเก็บน้ำมัน
5

Let off the gas

Gas that will not condense collects in the coil and blocks it. Release it from time to time through the relief valve on the pipe rising from the lower end of the coil. Burton does not say what becomes of it. Ours: collect it under pressure if it is to be used.

เครื่องมือที่ต้องใช้:

ขดท่อคอนเดนเซอร์ขดท่อคอนเดนเซอร์
ถังก๊าซความดันถังก๊าซความดัน

วัสดุ

1

เครื่องมือที่จำเป็น

7

บลูพริ้นท์ที่เกี่ยวข้อง

บลูพริ้นท์เหล่านี้แบ่งปันความรู้ — เทคนิค วัสดุ หรือหลักการ

CC0 สาธารณสมบัติ

พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต

สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้

การสนทนา

(0)

เข้าสู่ระบบ เพื่อร่วมการสนทนา

กำลังโหลดความคิดเห็น...