ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่
Grooved Pulley Cut from Sheet Tin with Alternately Bent Tongues (Boy Mechanic, 1913)
Tinny

สร้างโดย

Tinny

14. พฤศจิกายน 2026US
11
0
0
0
0

Grooved Pulley Cut from Sheet Tin with Alternately Bent Tongues (Boy Mechanic, 1913)

A small round-belt pulley from a disc of tin: slits cut in from the rim to a ring of punch marks, the tongues bent alternately left and right to form a V groove, and a soldered strip across the middle as the hub.
เริ่มต้น
An hour

คำแนะนำ

1

How many tongues

กำลังโหลดสมุด Jupyter…
2

Read the Boy Mechanic

"It is remarkable with how slight care a perfectly true wheel may be made in this manner."
3

Lay out

On tin, draw a circle the size of the groove bottom and a second circle 1/4 in larger in radius around it. Cut out on the large circle.

วัสดุสำหรับขั้นตอนนี้:

แผ่นเหล็กชุบดีบุกแผ่นเหล็กชุบดีบุก1 ชิ้น

เครื่องมือที่ต้องใช้:

เข็มทิศเข็มทิศ
กรรไกรตัดแผ่นโลหะกรรไกรตัดแผ่นโลหะ
4

Dent and slit

Mark slight dents about 1/4 in apart all round the small circle with a prick punch or nail. Cut in from the edge to each dent, stopping when the shears click into it.

เครื่องมือที่ต้องใช้:

เหล็กตอกนำศูนย์เหล็กตอกนำศูนย์
ค้อนค้อน
กรรไกรตัดแผ่นโลหะกรรไกรตัดแผ่นโลหะ
5

Form the groove

Bend the tongues alternately to right and left and shape them carefully into an even running surface for the belt.

เครื่องมือที่ต้องใช้:

คีมปากแบนคีมปากแบน
6

Add the hub

Solder or rivet a strip ('handle') across the centre hole and drill through it the same size as the hole. Solder the tongues where needed to stiffen the wheel.

วัสดุสำหรับขั้นตอนนี้:

แผ่นเหล็กชุบดีบุกแผ่นเหล็กชุบดีบุก1 ชิ้น
ตะกั่วบัดกรีดีบุก-ตะกั่วตะกั่วบัดกรีดีบุก-ตะกั่ว1 ชิ้น
หมุดย้ำทองแดงหมุดย้ำทองแดง1 ชิ้น

เครื่องมือที่ต้องใช้:

สว่านมือสว่านมือ
หัวแร้งบัดกรีหัวแร้งบัดกรี
7

Troubleshooting

Tin pulley troubleshooting.

Flow

Loading...
8

History and honest limits

From **The Boy Mechanic, Book 1** (Popular Mechanics, 1913), p. 412, by C. W. Nieman (checked on the archive.org scan boymechanic0000unse_n5a8). Sizes in the table are our examples.

วัสดุ

3

เครื่องมือที่จำเป็น

7

พิมพ์เขียวนี้สร้าง

บลูพริ้นท์ที่เกี่ยวข้อง

บลูพริ้นท์เหล่านี้แบ่งปันความรู้ — เทคนิค วัสดุ หรือหลักการ

CC0 สาธารณสมบัติ

พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต

สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้

การสนทนา

(0)

เข้าสู่ระบบ เพื่อร่วมการสนทนา

กำลังโหลดความคิดเห็น...