การทำงานร่วมกัน
ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่
Totem Pole of the Haida, Tlingit and Tsimshian: Cedar Log Adzed, Relief-Carved with Crests, Painted and Raised on Guys (Niblack, 1890)
Woody

สร้างโดย

Woody

15. พฤศจิกายน 2026NO
7
0
0
0
0

Totem Pole of the Haida, Tlingit and Tsimshian: Cedar Log Adzed, Relief-Carved with Crests, Painted and Raised on Guys (Niblack, 1890)

How the Haida, Tlingit and Tsimshian made the carved crest columns we call totem poles, as Albert Niblack recorded them around 1888: a cedar log got out of the forest and hauled up on skids, adzed smooth, relief-carved with the owner's clan crest at the top and his wife's crest and family legends below, painted with ochre or lignite ground with salmon eggs, and raised with poles, props and rope guys into a deep hole at a potlatch.
ขั้นสูง
Months to years

คำแนะนำ

1

Read Niblack

"These are the very tall ones erected in front of the houses, and are generally surmounted by the clan-totem of the chief occupant."
2

Plan the crests

The column tells whose it is: the owner's clan crest at the top (among the Tlingit often the phratry crest, with clan crests below), his wife's crest, which is also his children's, below it, or a family legend tied to his crest. The figures are the owner's own; carve your own family's story, not a copy of someone else's pole (ours).
3

Get out the log

Fell a large, straight cedar (ours: western red cedar). Split off what is not wanted with wedges and get the timber out in the rough in the forest, then tow or haul it to the site and lift it onto skids.

วัสดุสำหรับขั้นตอนนี้:

ซุงซีดาร์แดงซุงซีดาร์แดง1 ชิ้น

เครื่องมือที่ต้องใช้:

ขวานขวาน
ลิ่มไม้ลิ่มไม้
ค้อนไม้ค้อนไม้
เชือกเชือก
เสาไม้เสาไม้
4

Smooth the log

On the skids, smooth-finish the log with the adze. The old blades were green jade-like stone; in Niblack's day the favourite was the end of a broad flat file ground sharp and hafted.

เครื่องมือที่ต้องใช้:

ขวานถากขวานถาก
5

Carve in relief

Carve the crests in relief: rough down the surface with the chisel and adze, then smooth by scraping with sharp-edged shells or stones, or rub with dogfish skin for a finished surface. The carving was done by the owner if he was expert, or by carvers he hired.

วัสดุสำหรับขั้นตอนนี้:

หนังปลาฉลามหนามหนังปลาฉลามหนาม1 ชิ้น

เครื่องมือที่ต้องใช้:

ขวานถากขวานถาก
ชุดสิ่วไม้ชุดสิ่วไม้
ค้อนไม้ค้อนไม้
6

Grind the paint and paint

Grind red or brown ochre, charcoal or lignite in a stone mortar. For a lasting black on wood, grind lignite dry with salmon eggs first chewed with cedar bark: it gives the paint body and makes it stick. Paint the figures with hair or fibre brushes (in older times columns were simply daubed with ochre).

วัสดุสำหรับขั้นตอนนี้:

ดินเทศดิบดินเทศดิบ1 ชิ้น
ถ่านไม้ถ่านไม้1 ชิ้น
ลิกไนต์ลิกไนต์1 ชิ้น
ไข่ปลาแซลมอนไข่ปลาแซลมอน1 ชิ้น
เปลือกชั้นในของซีดาร์แดงเปลือกชั้นในของซีดาร์แดง1 ชิ้น

เครื่องมือที่ต้องใช้:

ครกและสากหินครกและสากหิน
พู่กันเส้นเล็กพู่กันเส้นเล็ก
7

Raise the column

Dig a deep hole in front of the house (ours: about a fifth of the pole's length, and well clear of the house front unless you are making a Haida doorway pole). Raise the column with poles, props and rope guys, many people pulling together, set its foot in the hole and pack it firm.

เครื่องมือที่ต้องใช้:

พลั่วพลั่ว
เชือกเชือก
เสาไม้เสาไม้
8

Troubleshooting

Totem pole troubleshooting.

Flow

Loading...
9

History and honest limits

From Albert P. Niblack, *The Coast Indians of Southern Alaska and Northern British Columbia*, **Report of the U.S. National Museum for 1888** (1890), pp. 279-282, 307-309, 319-320, 324 and Plate II (checked on the archive.org scan coastindiansofso00nibl). Among the Haida the column usually stood against the house with the doorway cut through it about three feet up; others stood a few feet in front. Raising was a potlatch: feasting, dancing and gifts, the work itself a small part of the time. Only the wealthy could afford one. Niblack gives no sizes or carving order: species, sizes, hole depth and the order of work are ours.

วัสดุ

7

เครื่องมือที่จำเป็น

10
  • ตัวยึดตำแหน่ง
  • ตัวยึดตำแหน่ง
  • ตัวยึดตำแหน่ง
  • ตัวยึดตำแหน่ง
  • ตัวยึดตำแหน่ง
  • ตัวยึดตำแหน่ง
  • ตัวยึดตำแหน่ง
  • ตัวยึดตำแหน่ง
  • ตัวยึดตำแหน่ง
  • ตัวยึดตำแหน่ง

พิมพ์เขียวนี้สร้าง

บลูพริ้นท์ที่เกี่ยวข้อง

บลูพริ้นท์เหล่านี้แบ่งปันความรู้ — เทคนิค วัสดุ หรือหลักการ

CC0 สาธารณสมบัติ

พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต

สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้

การสนทนา

(0)

เข้าสู่ระบบ เพื่อร่วมการสนทนา

กำลังโหลดความคิดเห็น...