การทำงานร่วมกัน
ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่
Saddler's Stitching Clamp from Two Oak Barrel Staves Screwed to a Deal Tenon (Hasluck, Harness Making, 1904)
Woody

สร้างโดย

Woody

14. พฤศจิกายน 2026NO
9
0
0
0
0

Saddler's Stitching Clamp from Two Oak Barrel Staves Screwed to a Deal Tenon (Hasluck, Harness Making, 1904)

The home-made saddler's clamp, or pair of clams, from Hasluck's Harness Making (1904): two curved oak barrel staves, thinned to springy jaws, screwed hard onto a dovetail-shaped tenon on a 20 x 3 x 3 in. deal post so the jaw tips grip the leather while both hands sew.
เริ่มต้น
An afternoon

คำแนะนำ

1

His sizes

กำลังโหลดสมุด Jupyter…
2

Read Hasluck

"A clamp can be made easily by the worker at home."
3

Cut the staves

Cut two oak cask or barrel staves 2 ft (610 mm) long and at least 3 in. (76 mm) wide, with the greatest bend in the middle. The more bent the staves, the more useful the clamp.

วัสดุสำหรับขั้นตอนนี้:

แผ่นไม้ถังไม้แผ่นไม้ถังไม้2 ชิ้น

เครื่องมือที่ต้องใช้:

เลื่อยมือเลื่อยมือ
4

Shape the jaws

Clean up the outside with a spokeshave. Leave one end the full stave thickness (about 1 in., 25 mm) and thin gradually to about 3/4 in. (19 mm) toward the other end, which forms the jaw (his fig. 55). Round the outer corners, plane the inside flat and smooth both sides with glass-paper.

วัสดุสำหรับขั้นตอนนี้:

กระดาษทรายกระดาษทราย1 ชิ้น

เครื่องมือที่ต้องใช้:

กบสองมือจับกบสองมือจับ
5

Cut the tenon

Take a sound piece of white deal 20 x 3 x 3 in. (510 x 76 x 76 mm) for the post C. Cut a dovetail-shaped tenon at least 6 in. (150 mm) long on its upper end. Fit the depth of the shoulders and the width at the top to the curve of your staves: the aim is for the jaw tips to press tightly together once the staves are home.

วัสดุสำหรับขั้นตอนนี้:

ไม้ระแนงไม้เนื้ออ่อนไม้ระแนงไม้เนื้ออ่อน1 ชิ้น

เครื่องมือที่ต้องใช้:

เลื่อยสันแข็งเลื่อยสันแข็ง
ชุดสิ่วไม้ชุดสิ่วไม้
6

Screw the staves on

Lay the thick ends of the staves against the two sides of the tenon and fix them with eight stout 2 1/4 in. (57 mm) screws (ours: four through each stave, as his fig. 54 shows). The tenon should be cut so that hard screwing is needed to bring the staves home. Countersink the screws flush with the stave faces.

วัสดุสำหรับขั้นตอนนี้:

สกรูไม้สกรูไม้8 ชิ้น

เครื่องมือที่ต้องใช้:

สว่านมือหมุนพร้อมดอกสว่านมือหมุนพร้อมดอก
ชุดดอกลบมุมรูชุดดอกลบมุมรู
ไขควงปากแบนไขควงปากแบน
7

Troubleshooting

Clamp troubleshooting.

Flow

Loading...
8

History and honest limits

From Paul N. Hasluck (ed.), **Harness Making** (Cassell, 1904), pp. 24-27 and figs. 52-55 (checked on the archive.org scan harnessmaking00hasl). The saddler sits with it between the knees, slanting against the left knee, the right leg thrown over it, so it does not yield under the awl. He gives no screw spacing; the four-per-stave layout, metric figures and tools are ours.

วัสดุ

4

เครื่องมือที่จำเป็น

7

บลูพริ้นท์ที่เกี่ยวข้อง

บลูพริ้นท์เหล่านี้แบ่งปันความรู้ — เทคนิค วัสดุ หรือหลักการ

CC0 สาธารณสมบัติ

พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต

สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้

การสนทนา

(0)

เข้าสู่ระบบ เพื่อร่วมการสนทนา

กำลังโหลดความคิดเห็น...