การทำงานร่วมกัน
ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่
Snaffle Riding Bridle: Cheeks, Slit Head Strap, Front, Throat Lash and Reins (Hasluck, Saddlery, 1904)
Tex

สร้างโดย

Tex

13. พฤศจิกายน 2026FO
4
0
0
0
0

Snaffle Riding Bridle: Cheeks, Slit Head Strap, Front, Throat Lash and Reins (Hasluck, Saddlery, 1904)

The plain riding bridle, "a single head and rein bridle", from Paul N. Hasluck's Saddlery (1904): two cheeks buckled to a snaffle bit, a head strap slit at each end into cheek and throat-lash straps, a front (browband), a throat lash and a pair of buckled reins. Every size is his; the bit is bought. It is the riding counterpart of the cart bridle.
ระดับกลาง
About 1 day

คำแนะนำ

1

Cutting list

กำลังโหลดสมุด Jupyter…
2

Read Saddlery, ch. VI

"All the stitching must be done from behind, so that the best face of the stitches will be next the horse when the bridle is on."
3

Make the cheeks

Cut two cheeks about 7/8 in wide and 9 in long. Each has a buckle at each end: one on a chape turned down, the other on the flat end of the strap without turning, with the billet underneath. Leave room for a loop before the buckle and the point of the cheek, and set the billet far enough behind the buckle for two loops; put a runner loop on the cheek and stitch another in with the chape. Cut the billets 9 in long. Stitch them in single-handed and back-stitch with linen thread, all from behind. Make one hole in each billet.

วัสดุสำหรับขั้นตอนนี้:

หนังทำเครื่องม้าหนังทำเครื่องม้า1 ชิ้น
หัวเข็มขัดทองเหลืองมีลิ้นหัวเข็มขัดทองเหลืองมีลิ้น4 ชิ้น
ด้ายลินินด้ายลินิน1 ชิ้น

เครื่องมือที่ต้องใช้:

มีดตัดหนังมีดตัดหนัง
เครื่องมือลบมุมขอบเครื่องมือลบมุมขอบ
เครื่องมือกรีดพับเครื่องมือกรีดพับ
สิ่วตอกรูหนังสิ่วตอกรูหนัง
เหล็กหมาด (สว่านเจาะรูมือ)เหล็กหมาด (สว่านเจาะรูมือ)
เข็มเย็บอานม้าสองเล่มเข็มเย็บอานม้าสองเล่ม
ปากคีบไม้สำหรับเย็บหนังปากคีบไม้สำหรับเย็บหนัง
แท่งขึ้นรูปห่วงสายแท่งขึ้นรูปห่วงสาย
เครื่องเจาะรูหนังเครื่องเจาะรูหนัง
4

Make the head strap

Cut the head strap 1-1/8 in by 1 ft 10 in and slit it 5 in at each end. For a 3/4 in cheek, slit 3/4 in on one side and 3/8 in for a 3/8 in throat lash, with the wide slits on the same side at both ends. Punch four holes in each wide slit and six, closer together, in each narrow one.

วัสดุสำหรับขั้นตอนนี้:

หนังทำเครื่องม้าหนังทำเครื่องม้า1 ชิ้น

เครื่องมือที่ต้องใช้:

มีดตัดหนังมีดตัดหนัง
เครื่องเจาะรูหนังเครื่องเจาะรูหนัง
ตลับเมตรตลับเมตร
5

Make the front

Cut the front 3/4 in by 1 ft 2-1/4 in from the end of one bend to the other, after bending. Turn it over the head strap and mark a line across close to it, so there is 1 ft 1 in between the cross lines. Stitch the ends down, with a row along each side.

วัสดุสำหรับขั้นตอนนี้:

หนังทำเครื่องม้าหนังทำเครื่องม้า1 ชิ้น
ด้ายลินินด้ายลินิน1 ชิ้น

เครื่องมือที่ต้องใช้:

มีดตัดหนังมีดตัดหนัง
สิ่วตอกรูหนังสิ่วตอกรูหนัง
เหล็กหมาด (สว่านเจาะรูมือ)เหล็กหมาด (สว่านเจาะรูมือ)
เข็มเย็บอานม้าสองเล่มเข็มเย็บอานม้าสองเล่ม
6

Make the throat lash

Make the throat lash 3/8 in by 1 ft 7 in after turning down for the buckles. Put two runner loops on it besides the loops at the buckles of each end.

วัสดุสำหรับขั้นตอนนี้:

หนังทำเครื่องม้าหนังทำเครื่องม้า1 ชิ้น
หัวเข็มขัดทองเหลืองมีลิ้นหัวเข็มขัดทองเหลืองมีลิ้น2 ชิ้น
ด้ายลินินด้ายลินิน1 ชิ้น

เครื่องมือที่ต้องใช้:

มีดตัดหนังมีดตัดหนัง
เหล็กหมาด (สว่านเจาะรูมือ)เหล็กหมาด (สว่านเจาะรูมือ)
เข็มเย็บอานม้าสองเล่มเข็มเย็บอานม้าสองเล่ม
แท่งขึ้นรูปห่วงสายแท่งขึ้นรูปห่วงสาย
7

Make the reins

Cut the reins 1 in or 7/8 in by 4 ft. Prepare them for the bit buckles like the bottom of the cheeks, in the flat. Put a 3/4 in covered buckle on the other end of one rein, narrowing its chape to the buckle's width, and narrow the end of the other rein for buckling. Put in the billets, 10 in long, with one loop before the buckle and two behind, "and always put the strong end of the rein in the billet end".

วัสดุสำหรับขั้นตอนนี้:

หนังทำเครื่องม้าหนังทำเครื่องม้า1 ชิ้น
หัวเข็มขัดทองเหลืองมีลิ้นหัวเข็มขัดทองเหลืองมีลิ้น3 ชิ้น
ด้ายลินินด้ายลินิน1 ชิ้น

เครื่องมือที่ต้องใช้:

มีดตัดหนังมีดตัดหนัง
เหล็กหมาด (สว่านเจาะรูมือ)เหล็กหมาด (สว่านเจาะรูมือ)
เข็มเย็บอานม้าสองเล่มเข็มเย็บอานม้าสองเล่ม
แท่งขึ้นรูปห่วงสายแท่งขึ้นรูปห่วงสาย
8

Put it together

Buckle the cheeks to the head strap's wide slits and the throat lash to the narrow ones, run the front over the head strap, buckle the cheeks' lower ends and the reins to the snaffle bit's rings, and buckle the two reins together. Buckled billets let the bit be taken off, which he prefers to stitching the cheeks and reins fast to it.

วัสดุสำหรับขั้นตอนนี้:

บังเหียนเหล็กสแนฟเฟิลบังเหียนเหล็กสแนฟเฟิล1 ชิ้น
9

Troubleshooting

Riding bridle troubleshooting.

Flow

Loading...
10

History and honest limits

From **Saddlery**, edited by Paul N. Hasluck, David McKay, 1904 (archive.org saddlery00hasl), chapter VI, "Riding Bridles", the snaffle bridle; every fraction was read on the scan. Not made here: his Pelham, Weymouth, gag, exercising and stallion bridles. The bit is bought. The metric figures are ours.

วัสดุ

4

เครื่องมือที่จำเป็น

10

พิมพ์เขียวนี้สร้าง

บลูพริ้นท์ที่เกี่ยวข้อง

บลูพริ้นท์เหล่านี้แบ่งปันความรู้ — เทคนิค วัสดุ หรือหลักการ

CC0 สาธารณสมบัติ

พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต

สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้

การสนทนา

(0)

เข้าสู่ระบบ เพื่อร่วมการสนทนา

กำลังโหลดความคิดเห็น...