การทำงานร่วมกัน
ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่

Homemade Hacksaw Frame Cut from Hard Wood (Boy Mechanic, 1915)
A hacksaw frame sawn from one piece of hard wood: the blade is bolted into a slot at the handle end and tensioned at the far end by a bolt with a bent sheet-metal head whose tongue sits in a saw cut so the blade cannot twist.
เริ่มต้น
Two hours
คำแนะนำ
1
1
Read the Boy Mechanic
Read the Boy Mechanic
"The frame is made of hard wood. The saw end is inserted in a slot sawed in the handle end, and a screw or small bolt holds it in place."
2
2
Cut the frame
Cut the frame
Saw the frame from one piece of hard wood as in the figure: a long back with a handle end (with a hand-hole) and a short far end, open between them for the blade.
วัสดุสำหรับขั้นตอนนี้:
แผ่นไม้เนื้อแข็ง1 ชิ้นเครื่องมือที่ต้องใช้:
เลื่อยมือ
เลื่อยฉลุ
สว่านมือหมุนพร้อมดอก
ตะไบ (ตะไบมือ)3
3
Fix the handle end
Fix the handle end
Saw a slot in the handle end, slip one end of the blade in, and hold it with a screw or small bolt through the blade's hole.
วัสดุสำหรับขั้นตอนนี้:
ใบเลื่อยตัดเหล็ก1 ชิ้น
สลักเกลียวหัวกลม1 ชิ้นเครื่องมือที่ต้องใช้:
เลื่อยมือ
สว่านมือ4
4
Make the tension bolt
Make the tension bolt
Bend a sheet-metal head onto a bolt (A in the figure) and fix the blade's other end to it. Pass the bolt through the far end of the frame and tighten its nut to draw the blade taut. A projection of the sheet metal fits a saw cut in the frame so the blade cannot turn.
วัสดุสำหรับขั้นตอนนี้:
แผ่นเหล็กชุบดีบุก1 ชิ้น
สลักเกลียวหัวกลม1 ชิ้น
น็อตปีกผีเสื้อ1 ชิ้นเครื่องมือที่ต้องใช้:
กรรไกรตัดแผ่นโลหะ
คีมปากแบน
สว่านมือ
เลื่อยมือ5
5
Troubleshooting
Troubleshooting
Wooden hacksaw troubleshooting.
Flow
Loading...
6
6
History and honest limits
History and honest limits
From **The Boy Mechanic, Book 2** (Popular Mechanics, 1915), p. 426, by W. A. Henry (checked on the archive.org scan boymechanicbook200chic2). No sizes are given; the wing nut and tools are ours.
วัสดุ
5- 1 ชิ้นตัวยึดตำแหน่ง
- 1 ชิ้นตัวยึดตำแหน่ง
- 2 ชิ้นตัวยึดตำแหน่ง
- 1 ชิ้นตัวยึดตำแหน่ง
- 1 ชิ้นตัวยึดตำแหน่ง
พิมพ์เขียวนี้สร้าง
บลูพริ้นท์ที่เกี่ยวข้อง
บลูพริ้นท์เหล่านี้แบ่งปันความรู้ — เทคนิค วัสดุ หรือหลักการ
CC0 สาธารณสมบัติ
พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต
สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้

