ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
อนาคตสีเขียว
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่
Making an Ektara — India's One-String Drone You Bend by Squeezing
Woody

สร้างโดย

Woody

3. กรกฎาคม 2026NO
0
0
0
0
0

Making an Ektara — India's One-String Drone You Bend by Squeezing

Build an ektara — literally 'one string': a gourd drum with a split-bamboo neck and a single string. Pluck it for a drone, then SQUEEZE the neck to slacken the string and bend the note down. A buildable school project that puts one of music's deepest facts — tension sets pitch — right in your hand.
เริ่มต้น
45 minutes

คำแนะนำ

1

One string, bent by hand

The ektara — 'ek' one, 'tara' string — is the drone of India's wandering singers. You pluck its single string and SQUEEZE its springy neck to bend the note up and down.
2

Prepare the gourd resonator

Cut the top off a dried bottle gourd to make an open bowl. This gourd is the sound-body of the instrument.

วัสดุสำหรับขั้นตอนนี้:

Mature Bottle GourdMature Bottle Gourd1 ชิ้น

เครื่องมือที่ต้องใช้:

Sloyd Carving KnifeSloyd Carving Knife
3

Skin the opening

Soak a piece of rawhide, stretch it drum-tight over the open mouth of the gourd, glue and lash it down, and let it dry hard. This skin will boom when the string is plucked.

วัสดุสำหรับขั้นตอนนี้:

RawhideRawhide1 ชิ้น
PVA Wood GluePVA Wood Glue1 ชิ้น
4

Split the neck

Take a length of bamboo and split it partway down into two long, springy arms — a forked neck that can flex when squeezed.

วัสดุสำหรับขั้นตอนนี้:

BambooBamboo1 ชิ้น

เครื่องมือที่ต้องใช้:

Sloyd Carving KnifeSloyd Carving Knife
5

Fix the neck to the gourd

Fit the two arms of the neck onto opposite sides of the gourd, straddling the skin, and lash them on firmly so they stand up tall and springy.

วัสดุสำหรับขั้นตอนนี้:

Abaca Tying TwineAbaca Tying Twine1 ชิ้น
6

Fit the tuning peg

Bore a hole near the top of the neck and fit a single tuning peg.

วัสดุสำหรับขั้นตอนนี้:

Tuning PegsTuning Pegs1 ชิ้น

เครื่องมือที่ต้องใช้:

AwlAwl
7

Attach the string

Tie the string to the very centre of the skin, run it straight up between the two neck arms, and wind it onto the peg.

วัสดุสำหรับขั้นตอนนี้:

Steel Music Wire 0.032"Steel Music Wire 0.032"1 ชิ้น
8

Tune the drone

Turn the peg until the string gives a clear, ringing note. This single note is the drone the whole instrument is built around.
9

Pluck it

Pluck the string with one finger. The skin booms and the string rings out its steady drone, richer and louder than a bare string could ever be.
10

Squeeze to bend the note

Now SQUEEZE the two neck arms together. They flex inward, slackening the string, and the note DROPS. Let go and it springs back up — the ektara's bouncing 'boing'.
11

Play with the beat

Pluck in time and pulse your squeeze so the drone bends up and down under the rhythm — the hypnotic sound the Baul singers of Bengal carry through their songs.
12

Compendium — tension, pitch and the skin drum

The ektara turns one of the deepest facts of music into something you feel in your hand: a string's pitch depends on its TENSION. Pull a string tighter and it rises; let it go slack and it falls. On most instruments the tension stays fixed while you play, and you change the note by shortening the string with frets or fingers — but the ektara does the opposite. Its one string never changes length; instead, squeezing the two springy arms of the split-bamboo neck bends them inward, which slackens the string and drops the pitch, and releasing them lets the arms spring back so the note rises. That living, sliding drone is the ektara's whole voice. It is the same physics as the musical bow, whose string tension bends the wooden stave into a bow — here the idea is simply turned around, with the player doing the bending by hand. And like the erhu and the banjo, the ektara sings through a skin: the string is tied to the middle of a stretched membrane over the gourd, and that membrane radiates the sound far more strongly than a bare string could. The ektara is the instrument of India's wandering singers, above all the Bauls of Bengal; add a second string and a longer neck and it grows toward the dotara and the wider family of Indian lutes.

วัสดุ

7
  • 1 ชิ้น
    ตัวยึดตำแหน่ง
  • 1 ชิ้น
    ตัวยึดตำแหน่ง
  • 1 ชิ้น
    ตัวยึดตำแหน่ง
  • 1 ชิ้น
    ตัวยึดตำแหน่ง
  • 1 ชิ้น
    ตัวยึดตำแหน่ง
  • 1 ชิ้น
    ตัวยึดตำแหน่ง
  • 1 ชิ้น
    ตัวยึดตำแหน่ง

เครื่องมือที่จำเป็น

2

You can swap these in

Can't get one of the materials? Swap it for an equivalent — these work just as well.

บลูพริ้นท์ที่เกี่ยวข้อง

บลูพริ้นท์เหล่านี้แบ่งปันความรู้ — เทคนิค วัสดุ หรือหลักการ

CC0 สาธารณสมบัติ

พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต

สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้

การสนทนา

(0)

เข้าสู่ระบบ เพื่อร่วมการสนทนา

กำลังโหลดความคิดเห็น...