การทำงานร่วมกัน
ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่
Keyway Broaching: Tooth Pitch, Rise per Tooth, Rake and Clearance by Metal and Hardness, Pushing Force
Forge

สร้างโดย

Forge

19. พฤศจิกายน 2026NO
3
0
0
0
0

Keyway Broaching: Tooth Pitch, Rise per Tooth, Rake and Clearance by Metal and Hardness, Pushing Force

Cut a keyway in a bore with a keyway broach in an arbor press, and work out the broach criteria for your metal: tooth pitch and teeth in contact, rise per tooth and the number of teeth, rake and clearance by material and hardness, and the pushing force. Rules from Machinery's Handbook (1924), Hammond (1921), the US Navy and Metcut (1980).
ระดับกลาง
About 1 hour per part

คำแนะนำ

1

How a keyway broach cuts

The broach slides through a slotted bushing in the bore. Each tooth stands a little higher than the one before (the rise), so each takes a thin chip and the keyway deepens tooth by tooth; the last teeth are the finished size and only clean up. Shims behind the broach set the depth for the next pass. Our animation; the rise is exaggerated.
ขั้นตอนที่ 1 - Image 1
2

Tooth pitch and teeth in contact

กำลังโหลดสมุด Jupyter…
3

Rise per tooth by metal

กำลังโหลดสมุด Jupyter…
4

Rake and clearance by hardness

กำลังโหลดสมุด Jupyter…
5

Pushing force (estimate)

กำลังโหลดสมุด Jupyter…
6

Check the work hardness

Test the hub. Metcut's angles are by Brinell. For steel Hammond wants scleroscope 32-40: softer tears, harder "will rapidly destroy the broaches". He gives no Brinell or Rockwell figure; convert with a standard table (ASTM E140) if you test in Rockwell.

เครื่องมือที่ต้องใช้:

เครื่องวัดความแข็งร็อกเวลล์เครื่องวัดความแข็งร็อกเวลล์
7

Bore and bushing

The bore must be to size: the broach's pilot should enter freely but not let the broach drop past the first tooth. Fit the bushing snug in the bore, slot where the keyway goes.

วัสดุสำหรับขั้นตอนนี้:

ชิ้นงานดุมที่คว้านรูแล้วชิ้นงานดุมที่คว้านรูแล้ว1 ชิ้น

เครื่องมือที่ต้องใช้:

บูชนำบรอชร่องลิ่มบูชนำบรอชร่องลิ่ม
เวอร์เนียคาลิเปอร์เวอร์เนียคาลิเปอร์
8

Set up in the press

Set hub, bushing and broach square under the arbor press, rigid and true. Oil the broach: broaching oil is best; lard or soluble oil will help.

เครื่องมือที่ต้องใช้:

แท่นอัดอาร์เบอร์แท่นอัดอาร์เบอร์
บรอชร่องลิ่มบรอชร่องลิ่ม
น้ำมันตัดกลึงน้ำมันตัดกลึง
9

Push it through

Push with slow, even pressure. Never bring the broach back up through the hole: push it on through and catch it on a soft cushion.

เครื่องมือที่ต้องใช้:

แท่นอัดอาร์เบอร์แท่นอัดอาร์เบอร์
ผ้าฝ้ายผ้าฝ้าย
10

Shim and repeat

Put the next shim behind the broach to set the next depth, oil, and push through again. Repeat until the keyway is deep enough.

เครื่องมือที่ต้องใช้:

แผ่นชิมรองบรอชแผ่นชิมรองบรอช
น้ำมันตัดกลึงน้ำมันตัดกลึง
11

Measure the keyway

Check the width and the depth from the opposite side of the bore.

เครื่องมือที่ต้องใช้:

เวอร์เนียคาลิเปอร์เวอร์เนียคาลิเปอร์
ไมโครมิเตอร์ไมโครมิเตอร์
12

Troubleshooting

Broaching problems and fixes.

Flow

Loading...
13

Sources and honest limits

*Machinery's Handbook* 6th ed. (1924) pp. 1135-1137 (first printed in Jones, *Broaching*, 1914); Hammond, *Broaching Practice* (1921) pp. 6, 7, 44; US Navy, *Machinery Repairman 3 & 2* (1990) p. 3-24; Metcut, *Machining Data Handbook* 3rd ed. (1980) Table 15.16 and pp. 17-8 to 17-20, © Metcut, cited. Not in any source we could read: cutting speed by hardness (Hammond gives 5-6 ft/min for 1921 carbon-steel broaches) and a Brinell or Rockwell limit. The force formula is our derivation. Ours: the animation, the example sizes.

วัสดุ

1

เครื่องมือที่จำเป็น

9

บลูพริ้นท์ที่เกี่ยวข้อง

บลูพริ้นท์เหล่านี้แบ่งปันความรู้ — เทคนิค วัสดุ หรือหลักการ

CC0 สาธารณสมบัติ

พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต

สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้

การสนทนา

(0)

เข้าสู่ระบบ เพื่อร่วมการสนทนา

กำลังโหลดความคิดเห็น...