การทำงานร่วมกัน
ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่
Lead Came Mould: Two Hinged Grooved Irons (Theophilus, tr. Hendrie 1847)
Forge

สร้างโดย

Forge

4. พฤศจิกายน 2026NO
11
0
0
0
0

Lead Came Mould: Two Hinged Grooved Irons (Theophilus, tr. Hendrie 1847)

The iron mould in which Theophilus cast the lead rods of glass windows: two irons a yard long, hinged at one end with a nail, filed to close without a chink of light, with a matching groove hollowed down the middle of each so the lead poured in makes one rod. The free ends are made a little wider and thinner to form a pouring mouth, and the two halves are keyed so they cannot slip while casting. Source: Theophilus, De Diversis Artibus, Book II, ch. XXIV, tr. R. Hendrie (1847), p. 147. Picture: the chapter.
ระดับกลาง
Unknown

คำแนะนำ

1

Hinge the irons

Take two irons two fingers broad, one finger thick and a yard long. Join them at one end like a hinge, fastened by a nail, so they open and shut. Make the other ends a little wider and thinner, so that when shut they form the start of a cavity (the pouring mouth). Not given: how the hinge is formed.

วัสดุสำหรับขั้นตอนนี้:

แท่งเหล็กดัดแท่งเหล็กดัด2 2 fingers x 1 finger x 1 yard
ตะปูตะปู1 hinge pin

เครื่องมือที่ต้องใช้:

ค้อนค้อน
2

Fit the faces

Let the outer sides lie even, and file the two faces together until no light shows between them when closed.

เครื่องมือที่ต้องใช้:

ตะไบโลหะตะไบโลหะ
3

Cut the grooves

Open the irons. With a rule, draw two narrow lines down the middle of each piece, facing each other, from top to bottom. Hollow out between them with the chasing iron used for hollowing lamps, as deep as you wish, and rasp a little inside so the lead poured in makes one piece. Key the mouth so one half cannot slip on the other while casting.

เครื่องมือที่ต้องใช้:

ไม้บรรทัดไม้บรรทัด
ตะไบหยาบตะไบหยาบ

วัสดุ

2
  • 2 2 fingers x 1 finger x 1 yard
    ตัวยึดตำแหน่ง
  • 1 hinge pin
    ตัวยึดตำแหน่ง

เครื่องมือที่จำเป็น

4
  • ตัวยึดตำแหน่ง
  • ตัวยึดตำแหน่ง
  • ตัวยึดตำแหน่ง
  • ตัวยึดตำแหน่ง

CC0 สาธารณสมบัติ

พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต

สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้

การสนทนา

(0)

เข้าสู่ระบบ เพื่อร่วมการสนทนา

กำลังโหลดความคิดเห็น...