ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่
Leave-In Probe Thermometer: Stainless Probe on a Flexible Lead to a Programmable Timer (Chapman, US 6,568,848, 2003)
Penny

สร้างโดย

Penny

3. พฤศจิกายน 2026DK
6
0
0
0
0

Leave-In Probe Thermometer: Stainless Probe on a Flexible Lead to a Programmable Timer (Chapman, US 6,568,848, 2003)

A meat thermometer you leave in the roast. A pointed stainless steel probe stays in the meat. A flexible lead runs out of the oven to a battery timer unit with a display, keys and a beeper. You pick the meat and how well done you want it; the unit shows the temperature and the time left, and beeps when it is done. Result: continuous reading of the inside of the meat without opening the oven. Source: P. A. Chapman and C.-A. Chang (Maverick Industries), US 6,568,848 (2003). The patent's main form sends the readings by radio; it also states this wired form. Unknown: the sensor, the circuit, the target temperatures and the materials. Picture: the patent drawing.
ระดับกลาง
Unknown

คำแนะนำ

1

Make the probe

Make the probe of a rigid material such as stainless steel. It has a pointed end that goes into the meat, a straight section from the point, then a curved section to the other end. The temperature sensor sits inside. Not given: the type of sensor, sizes.

วัสดุสำหรับขั้นตอนนี้:

ท่อเทอร์โมมิเตอร์พร้อมจุกปลายแหลมท่อเทอร์โมมิเตอร์พร้อมจุกปลายแหลม1 stainless steel
เซ็นเซอร์วัดอุณหภูมิเซ็นเซอร์วัดอุณหภูมิ1 ชิ้น

เครื่องมือที่ต้องใช้:

ขนาดที่ไม่ทราบขนาดที่ไม่ทราบ
หัวแร้งบัดกรีหัวแร้งบัดกรี
2

Fit the flexible lead and plug

Join a flexible lead to the curved end of the probe, so the probe can lie at any angle to the unit. Put a plug with a male end on the other end of the lead. Not given: the lead material, the plug type, the length.

วัสดุสำหรับขั้นตอนนี้:

สายเคเบิลหลายแกนสายเคเบิลหลายแกน1 flexible lead
ขั้วต่อที่ไม่ทราบขั้วต่อที่ไม่ทราบ1 plug
ลวดตะกั่วบัดกรีลวดตะกั่วบัดกรี1 as needed

เครื่องมือที่ต้องใช้:

หัวแร้งบัดกรีหัวแร้งบัดกรี
ขนาดที่ไม่ทราบขนาดที่ไม่ทราบ
3

Build the timer unit

In a hand-held case, fit a microprocessor that runs the cooking programs, a liquid crystal display, a beeper and batteries. Fit nine keys: clock or timer, probe A or B, meat type, doneness, two to set and change the final temperature, hours, minutes, and start/stop. Add a jack for each probe, a stand to set it upright and a clip for a belt or pocket. Not given: the circuit, the program, the case material.

วัสดุสำหรับขั้นตอนนี้:

แผ่นวงจรพิมพ์แผ่นวงจรพิมพ์1 ชิ้น
วงจรรวมวงจรรวม1 microprocessor
จอแอลซีดีแบบเซกเมนต์จอแอลซีดีแบบเซกเมนต์1 ชิ้น
ปุ่มกดปุ่มกด9 keys
บัซเซอร์เพียโซบัซเซอร์เพียโซ1 ชิ้น
ขั้วต่อที่ไม่ทราบขั้วต่อที่ไม่ทราบ2 probe jacks
แบตเตอรี่แบตเตอรี่1 as needed
วัสดุที่ไม่ทราบวัสดุที่ไม่ทราบ1 case, stand, clip
ลวดตะกั่วบัดกรีลวดตะกั่วบัดกรี1 as needed

เครื่องมือที่ต้องใช้:

หัวแร้งบัดกรีหัวแร้งบัดกรี
ชุดไขควงชุดไขควง
4

Roast with it

Plug the probe into the timer unit. Pick the meat (beef, veal, lamb, pork, chicken, turkey) and the doneness (rare, medium rare, medium, well-done); the patent cooks to USDA guidelines. Push the probe into the meat, put it in the oven and lead the cable out to the unit, then press start. The display shows the meat, the doneness, the temperature (°F or °C) and the time left, and the beeper sounds at the right moments. A second probe watches a second piece. Not given: the temperature for each doneness.

เครื่องมือที่ต้องใช้:

เตาอบเตาอบ

วัสดุ

12

เครื่องมือที่จำเป็น

4

บลูพริ้นท์ที่เกี่ยวข้อง

บลูพริ้นท์เหล่านี้แบ่งปันความรู้ — เทคนิค วัสดุ หรือหลักการ

CC0 สาธารณสมบัติ

พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต

สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้

การสนทนา

(0)

เข้าสู่ระบบ เพื่อร่วมการสนทนา

กำลังโหลดความคิดเห็น...