การทำงานร่วมกัน
ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่

Pit-Sawing Square Timber and Battens from a Log (Moxon, 1678)
How sawyers and joiners in Moxon's day ripped a log into squares, quarters and battens: lines struck with a chalked string, the log wedged over a saw-pit or on high trestles and plumbed true, and a framed pit-saw worked by a top-man and a pit-man, with wedges in the kerf to keep it open.
ระดับกลาง
A day per log (two people)
คำแนะนำ
1
1
Setting off a scantling
Setting off a scantling
กำลังโหลดสมุด Jupyter…
2
2
Read Mechanick Exercises
Read Mechanick Exercises
"If they would take any Square, Quarter, or Batten, &c. off, they first set off their Scantlin."
3
3
Set off the size
Set off the size
Open the compasses to the size you want plus the saw's kerf (e.g. 70 mm + kerf for a 70 x 70 mm square) and prick that distance from one side at both ends of the log. Set off exactly the size and the piece comes out half a kerf thinner.
วัสดุสำหรับขั้นตอนนี้:
ท่อนซุงไม้เนื้ออ่อน1 ชิ้นเครื่องมือที่ต้องใช้:
วงเวียนปลายแหลมสองขา
ตลับเมตร4
4
Line the stuff
Line the stuff
Chalk a line hard, hold it on the pricks at both ends, strain it stiff, lift the middle straight up and let it snap down to leave a chalk line. Mark the underside the same way. Working alone, hook the line on a compass point or a nail at one end.
เครื่องมือที่ต้องใช้:
เอ็นตีเส้นชอล์ก
วงเวียนปลายแหลมสองขา5
5
Set up over the pit
Set up over the pit
Wedge the log fast over a saw-pit, or on two strong trestles a little more than man-high with four spreading legs. Plumb the side the lines were set from so it hangs exactly upright, or the piece will be thicker at top or bottom.
เครื่องมือที่ต้องใช้:
ลิ่มไม้
ลูกดิ่ง6
6
Saw
Saw
Enter the pit-saw at one end: the top-man on the log guides it exactly in the line and draws it a little towards him on the down stroke; the pit-man below pulls straight down with all his strength, not so far that the handles drop out of reach. On the up stroke bear the teeth off the wood. When the sawn pieces pinch the blade, drive a wedge into the kerf, as far as you dare without splitting it.
เครื่องมือที่ต้องใช้:
เลื่อยหลุม (เลื่อยสองคน)
ลิ่มไม้
ค้อนไม้7
7
Square and batten
Square and batten
Turn the log and line and saw the other faces the same way to get squares (70 x 70 mm here) and thinner battens.
เครื่องมือที่ต้องใช้:
เลื่อยหลุม (เลื่อยสองคน)
เอ็นตีเส้นชอล์ก
วงเวียนปลายแหลมสองขา8
8
Troubleshooting
Troubleshooting
Pit-sawing troubleshooting.
Flow
Loading...
9
9
History and honest limits
History and honest limits
From Joseph Moxon, **Mechanick Exercises**, Numb. V, Joinery (1678), §27, pp. 96-98, and Plate 4 M (checked on the archive.org scan mechanickexercis00moxo). Softwood, the 70 mm size and the kerf figure are ours.
วัสดุ
1- 1 ชิ้นตัวยึดตำแหน่ง
พิมพ์เขียวนี้สร้าง
CC0 สาธารณสมบัติ
พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต
สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้

