การทำงานร่วมกัน
ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่
Quick-Acting Hardwood Bench Vise with Cam and Drop Roll (Boy Mechanic, 1919)
Woody

สร้างโดย

Woody

14. พฤศจิกายน 2026NO
7
0
0
0
0

Quick-Acting Hardwood Bench Vise with Cam and Drop Roll (Boy Mechanic, 1919)

A home-made bench vise entirely of hard wood: the front jaw slides in and out on arm C, a loose roll A drops into place to lock it, a cam lever in front gives the final squeeze, and the pivoted jaw B tilts to grip work whose sides are not parallel.
ระดับกลาง
A day

คำแนะนำ

1

Sizes in mm

กำลังโหลดสมุด Jupyter…
2

Read the Boy Mechanic

"A detail is given of each part, with dimensions, so that it is not difficult to make it from hard wood."
3

Cut the parts to the drawing

Cut every part from hard wood to the sizes in the drawing: the 6-1/2 x 7-3/8 x 3/4 in plate with its 2-5/16 x 2-7/16 in opening, the 6-1/2 x 4 x 1 in slotted plate, the 5 x 5-1/2 x 1/2 in plate, the blocks, the forked piece, the long bar drawn at the bottom (2 x 1-3/8 in; we take it to be arm C) and the cam lever (5-1/2 in between centres, 5/16 in pin hole; its edge view is drawn 5/8 in).

วัสดุสำหรับขั้นตอนนี้:

แผ่นไม้เนื้อแข็งแผ่นไม้เนื้อแข็ง1 ชิ้น

เครื่องมือที่ต้องใช้:

เลื่อยมือเลื่อยมือ
เลื่อยฉลุเลื่อยฉลุ
สิ่วสิ่ว
สว่านมือหมุนพร้อมดอกสว่านมือหมุนพร้อมดอก
4

Turn roll A

Make roll A, a round hardwood roll 1-1/16 in across and 1-7/8 in long.

วัสดุสำหรับขั้นตอนนี้:

เดือยไม้เนื้อแข็งเดือยไม้เนื้อแข็ง1 ชิ้น

เครื่องมือที่ต้องใช้:

เลื่อยมือเลื่อยมือ
5

Assemble under the bench

Fit the parts under the bench top as the section view shows: arm C slides through the fixed part, roll A sits in its curved seat behind the jaw so it can drop and wedge the arm, jaw B is pivoted so it swings loose, and the cam lever is pinned at the front. Screw and bolt the fixed parts to the bench.

วัสดุสำหรับขั้นตอนนี้:

สกรูไม้สกรูไม้1 ชิ้น
สลักเกลียวหัวกลมสลักเกลียวหัวกลม1 ชิ้น

เครื่องมือที่ต้องใช้:

สว่านมือหมุนพร้อมดอกสว่านมือหมุนพร้อมดอก
ค้อนค้อน
6

Use it

To open: turn the cam, then lift the front of the vise to free roll A, and slide the front jaw out to the size of the work. Put the work in: roll A drops into place and clamps arm C. Turn the cam to tighten.
7

Troubleshooting

Wooden vise troubleshooting.

Flow

Loading...
8

History and honest limits

From **The Boy Mechanic, Book 3** (Popular Mechanics, 1919), p. 85, by J. C. Hansen (checked on the archive.org scan boymechanic0003unse). The text names only roll A, jaw B, arm C and the cam; build the other pieces as drawn. Metric figures are ours.

วัสดุ

4

เครื่องมือที่จำเป็น

5

บลูพริ้นท์ที่เกี่ยวข้อง

บลูพริ้นท์เหล่านี้แบ่งปันความรู้ — เทคนิค วัสดุ หรือหลักการ

CC0 สาธารณสมบัติ

พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต

สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้

การสนทนา

(0)

เข้าสู่ระบบ เพื่อร่วมการสนทนา

กำลังโหลดความคิดเห็น...