การทำงานร่วมกัน
ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่
Expanding Book Support: Lazy-Tongs Between Two End Pieces, Locked by a Thumb-Nut (Roseboom, 1901)
Forge

สร้างโดย

Forge

13. พฤศจิกายน 2026NO
7
0
0
0
0

Expanding Book Support: Lazy-Tongs Between Two End Pieces, Locked by a Thumb-Nut (Roseboom, 1901)

Jesse Roseboom of Cincinnati received US 668,961, dated 26 February 1901, for a book support that fills any gap on a shelf. Two end pieces are joined by a lazy-tongs; set it between the books and the shelf's side, open it until the books stand up firmly, and tighten a thumb-nut on the centre bolt, where two roughened disks lock the levers. We make it from hardwood and flat bar. All sizes are ours.
เริ่มต้น
About 3 hours

คำแนะนำ

1

How far it opens

กำลังโหลดสมุด Jupyter…
2

Read US 668,961

"It is placed between two sets of books on a shelf or the like or between a row of books and an upright of the shelf, and the connection B is then expanded, so as to press the end pieces against the upright and the adjacent book, after which the connection is adjustably fixed."
3

Make the end pieces

Cut two hardwood end pieces about as tall as your books' lower half (ours), his end pieces A, and sand them. Screw a small butt hinge to the middle of each inner face, his hinge-plates E, with the knuckle upright.

วัสดุสำหรับขั้นตอนนี้:

แผ่นไม้เนื้อแข็งแผ่นไม้เนื้อแข็ง1 ชิ้น
บานพับประตูบานพับประตู2 ชิ้น
สกรูไม้สกรูไม้1 ชิ้น

เครื่องมือที่ต้องใช้:

เลื่อยมือเลื่อยมือ
กระดาษทรายกระดาษทราย
ชุดไขควงชุดไขควง
4

Make the levers

Cut two long levers C and four short levers D of flat bar, round the ends and drill them at the notebook's centres. Drill the long levers at their middles for the bolt. File two washers rough on one face and fix one to each long lever round its centre hole, his corrugated disks H.

วัสดุสำหรับขั้นตอนนี้:

เหล็กแบนกล้าละมุนเหล็กแบนกล้าละมุน1 ชิ้น
แหวนรองแบนแหวนรองแบน1 ชิ้น

เครื่องมือที่ต้องใช้:

เลื่อยตัดเหล็กเลื่อยตัดเหล็ก
ชุดตะไบชุดตะไบ
สว่านแท่นสว่านแท่น
ชุดดอกสว่านชุดดอกสว่าน
ปากกาจับชิ้นงานหน้าโต๊ะปากกาจับชิ้นงานหน้าโต๊ะ
5

Assemble the lazy-tongs

Bolt the long levers together at their centres with the rough faces meeting and a wing nut on the bolt, his bolt F and thumb-nut G. Rivet a short lever to each arm end of the long levers, loosely so they turn, and rivet the other ends of each pair to the free leaf of an end piece's hinge. The long levers' ends should bear on the end pieces and keep them upright.

วัสดุสำหรับขั้นตอนนี้:

สกรูหัวจมหกเหลี่ยมสกรูหัวจมหกเหลี่ยม1 ชิ้น
น็อตปีกผีเสื้อน็อตปีกผีเสื้อ1 ชิ้น
หมุดย้ำเหล็กกล้าหมุดย้ำเหล็กกล้า1 ชิ้น

เครื่องมือที่ต้องใช้:

ค้อนหัวกลมค้อนหัวกลม
เหล็กตอกนำศูนย์เหล็กตอกนำศูนย์
ประแจเลื่อนประแจเลื่อน
6

Use it

Set it in the gap on the shelf, open it until both end pieces press the books and the shelf's side, and tighten the wing nut. Loosen the nut to close it up and move it.
7

Troubleshooting

Book support troubleshooting.

Flow

Loading...
8

History and honest limits

**Jesse Roseboom** of Cincinnati, US 668,961, dated 26 February 1901, filed 7 August 1900. He claimed "a book-support for use on shelves and the like, comprising end pieces, and the long and short levers interposed between the end pieces; the long levers being pivotally connected together, and the short levers being pivotally connected to the arms of the long levers, and to the end pieces", and the roughened meeting faces with bolt and nut. He gives no sizes; the hardwood, flat bar, hinges as his hinge-plates, rivets and all sizes are ours.

วัสดุ

8

เครื่องมือที่จำเป็น

11

บลูพริ้นท์ที่เกี่ยวข้อง

บลูพริ้นท์เหล่านี้แบ่งปันความรู้ — เทคนิค วัสดุ หรือหลักการ

CC0 สาธารณสมบัติ

พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต

สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้

การสนทนา

(0)

เข้าสู่ระบบ เพื่อร่วมการสนทนา

กำลังโหลดความคิดเห็น...