ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่
Rubber Thread: One Long Strand Cut Spirally from Cured Sheet (Gibbons 1934)
Youblob · CC0
Tex

สร้างโดย

Tex

27. ตุลาคม 2026FO
11
0
0
0
0

Rubber Thread: One Long Strand Cut Spirally from Cured Sheet (Gibbons 1934)

The rubber in elastic webbing and braided elastic is not spun: it is cut. A thin cured sheet is wound on a big drum and a small fast circular knife, walked across the drum by a lead screw, cuts it into one long square strand. How fast the knife travels sets the thread's width. This is how Edwin Gibbons described the American practice in 1934. Source: E. J. Gibbons, "Rubber Thread in Narrow Fabrics", India Rubber World, 1 July 1934. Starting from our cured rubber sheet and the tools are ours. Picture drawn by Youblob.
ระดับกลาง
1 day

คำแนะนำ

1

Start from thin cured sheet

Take thin vulcanised rubber sheet, hung up and dried. Gibbons's sheets were gauged in hundredths of an inch; for a square thread, cut it as wide as the sheet is thick (ours).

วัสดุสำหรับขั้นตอนนี้:

แผ่นยางธรรมชาติแผ่นยางธรรมชาติ1 as required

เครื่องมือที่ต้องใช้:

ชั้นตากแห้งชั้นตากแห้ง
เวอร์เนียร์ดิจิทัล 6 นิ้วเวอร์เนียร์ดิจิทัล 6 นิ้ว
2

Wind it on the drum

Wind the sheet on a large drum (his were 6 to 7 feet across) and fasten the ends.

เครื่องมือที่ต้องใช้:

เครื่องตัดเส้นด้ายยางเครื่องตัดเส้นด้ายยาง
3

Cut with the travelling knife

Turn the drum very slowly and bring a small, high-speed circular knife against the rubber. A long lead screw carries the knife across the drum face; its speed against the drum sets the width of the cut, and so of the thread.

เครื่องมือที่ต้องใช้:

เครื่องตัดเส้นด้ายยางเครื่องตัดเส้นด้ายยาง
เวอร์เนียร์ดิจิทัล 6 นิ้วเวอร์เนียร์ดิจิทัล 6 นิ้ว
4

Tie, unwind and dust

Tie the many cut ends together. As the drum is slowly unwound, dust the thread lightly with talc so the cut edges do not stick together.

วัสดุสำหรับขั้นตอนนี้:

แป้งทัลคัมแป้งทัลคัม1 as required

เครื่องมือที่ต้องใช้:

เครื่องตัดเส้นด้ายยางเครื่องตัดเส้นด้ายยาง
5

Wash, dry and chain

Wash and dry it again, then link it in a chain stitch for keeping: a "chain of rubber".

วัสดุสำหรับขั้นตอนนี้:

น้ำน้ำ1 as required

เครื่องมือที่ต้องใช้:

ชั้นตากแห้งชั้นตากแห้ง

วัสดุ

3
  • ตัวยึดตำแหน่ง
  • ตัวยึดตำแหน่ง
  • 1 as required
    ตัวยึดตำแหน่ง

เครื่องมือที่จำเป็น

3

พิมพ์เขียวนี้สร้าง

CC0 สาธารณสมบัติ

พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต

สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้

การสนทนา

(0)

เข้าสู่ระบบ เพื่อร่วมการสนทนา

กำลังโหลดความคิดเห็น...