ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่
Russia Sheet Iron: Charcoal-Packed Sheets Hammered to a Mirror Polish (Jordan after Koulibine, 1867)
Forge

สร้างโดย

Forge

4. พฤศจิกายน 2026NO
9
0
0
0
0

Russia Sheet Iron: Charcoal-Packed Sheets Hammered to a Mirror Polish (Jordan after Koulibine, 1867)

The glossy blue-black Russia sheet iron, long a Russian secret, as the engineer Koulibine described it to Professor Jordan for the Paris Exhibition of 1867: charcoal iron is rolled into black sheets, then packed red-hot with powdered charcoal between them and hammered under a one-ton hammer, then polished cold under a second. The charcoal, shut in between the hot sheets without air, cements the surface: it takes a high polish and rusts less. Once cemented, a sheet must not go back into the heating furnace. Unknown: how the charcoal finery iron is made. The source does not give it. Source: 'Russia Sheet Iron', Scientific American Supplement No. 154 (1878), pp. 2448-2449, after Jordan's 1867 report. Picture: the article.
ขั้นสูง
Unknown

คำแนะนำ

1

Roll the blooms into leaves

Start from charcoal iron made in finery fires and brought into blooms about one inch thick. Heat the blooms to cherry heat and roll them into leaves. Ours: the furnace and the rolling mill; the source names neither.

วัสดุสำหรับขั้นตอนนี้:

เหล็กถลุงด้วยถ่านไม้เหล็กถลุงด้วยถ่านไม้1 blooms about 1 inch thick

เครื่องมือที่ต้องใช้:

เตาสะท้อนความร้อนเตาสะท้อนความร้อน
เครื่องรีดโลหะเครื่องรีดโลหะ
คีมช่างตีเหล็กคีมช่างตีเหล็ก
2

Roll the black sheets

Cut each leaf into pieces that match the weight of the sheets to be made. Pile the pieces on one another and roll them together until they are as thin as wanted. These are the black sheets.

เครื่องมือที่ต้องใช้:

กรรไกรตัดแผ่นเหล็กกรรไกรตัดแผ่นเหล็ก
เตาสะท้อนความร้อนเตาสะท้อนความร้อน
เครื่องรีดโลหะเครื่องรีดโลหะ
คีมช่างตีเหล็กคีมช่างตีเหล็ก
3

Pack with charcoal

Heat a number of black sheets at a time to red heat and pile them one on another, sprinkling pulverized charcoal, a black impalpable powder, between each two. Two thicker sheets form the bottom and the cover of the packet. Ours: we pound lump charcoal in a mortar.

วัสดุสำหรับขั้นตอนนี้:

ถ่านไม้ก้อน (ไม้เนื้อแข็ง)ถ่านไม้ก้อน (ไม้เนื้อแข็ง)1 pulverized

เครื่องมือที่ต้องใช้:

ครกและสากหินครกและสากหิน
เตาสะท้อนความร้อนเตาสะท้อนความร้อน
คีมช่างตีเหล็กคีมช่างตีเหล็ก
4

Hammer the packet

Hammer the packet to thin the sheets further, under a hammer whose head weighs 1,000 to 1,100 kg (2,200 to 2,400 lb). Ours: a trip hammer; the source does not say how the hammer is driven.

เครื่องมือที่ต้องใช้:

ค้อนตีเหล็กลูกเบี้ยวค้อนตีเหล็กลูกเบี้ยว
คีมช่างตีเหล็กคีมช่างตีเหล็ก
5

Polish under the second hammer

When the sheets are almost cold, bring them under a second hammer of the same weight with a large face, rounded at the edges, to give them polish and lustre. Do not put them back in the heating furnace.

เครื่องมือที่ต้องใช้:

ค้อนตีเหล็กลูกเบี้ยวค้อนตีเหล็กลูกเบี้ยว
คีมช่างตีเหล็กคีมช่างตีเหล็ก
6

Clip and sort

Let the sheets cool completely, then clip them and sort them into three classes by the perfection of their polish. A first-class sheet is like a mirror, without a spot on its surface.

เครื่องมือที่ต้องใช้:

กรรไกรตัดแผ่นเหล็กกรรไกรตัดแผ่นเหล็ก

วัสดุ

2

เครื่องมือที่จำเป็น

6

CC0 สาธารณสมบัติ

พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต

สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้

การสนทนา

(0)

เข้าสู่ระบบ เพื่อร่วมการสนทนา

กำลังโหลดความคิดเห็น...