ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่

Samarium: Oxide Reduced with Graphite at 1700 °C in Vacuum and Distilled Twice (Downing, Gorski and Koerner, US 3,104,970)
Samarium holds on to oxygen too hard for ordinary smelting. Heated with graphite in a hard vacuum it boils off as samarium carbide vapour; a second distillation of that carbide, caught on a tantalum plate, gives the metal itself.
Result: samarium metal, 99.7 % pure.
Source: J. H. Downing, H. L. Gorski and E. L. Koerner, US 3,104,970 (1963), Example I. Work at 1700 °C under vacuum. Picture drawn by Youblob.
ขั้นสูง
1 day
คำแนะนำ
1
1
Mix and pellet
Mix and pellet
Mix intimately 79 parts by weight of 99.9 % samarium oxide with 21 parts of powdered graphite (12.7 % more carbon than the oxygen needs), with no particle larger than about 50 microns. Press into pellets 0.75 in across; pellets let the gases and vapour escape.
วัสดุสำหรับขั้นตอนนี้:
ซาแมเรียมออกไซด์1 79 parts by weightเครื่องมือที่ต้องใช้:
ผงแกรไฟต์
เครื่องอัดไฮดรอลิก2
2
Reduce and distil to carbide
Reduce and distil to carbide
Heat the pellets in a vacuum induction furnace to 1700 °C under 0.5 micron or less and hold three hours. Samarium carbide condenses on a graphite condenser (carbon resists the carbon monoxide given off). Only a little oxide and carbon stay behind; they can go back into the next charge.
เครื่องมือที่ต้องใช้:
เบ้าหลอมแกรไฟต์
เตาเหนี่ยวนำ
ปั๊มสุญญากาศ
ตัวควบแน่นแกรไฟต์3
3
Distil the metal onto tantalum
Distil the metal onto tantalum
Heat the carbide from the first condenser to 1700 °C under 0.05 micron and hold two hours. Samarium metal condenses on a tantalum condenser: 99.7 % samarium, 0.05 % carbon, 0.10 % oxygen.
เครื่องมือที่ต้องใช้:
เบ้าหลอมแกรไฟต์
เตาเหนี่ยวนำ
ปั๊มสุญญากาศ
ตัวควบแน่นแทนทาลัมวัสดุ
1- 1 79 parts by weightตัวยึดตำแหน่ง
เครื่องมือที่จำเป็น
7- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- 1 vendor sell this, none ship to you yetตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
พิมพ์เขียวนี้สร้าง
บลูพริ้นท์ที่เกี่ยวข้อง
บลูพริ้นท์เหล่านี้แบ่งปันความรู้ — เทคนิค วัสดุ หรือหลักการ
CC0 สาธารณสมบัติ
พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต
สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้

