การทำงานร่วมกัน
ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่

Saw Set: a Bevelled Iron Block (Shop Notes, 1909)
A home-made saw set: a foot of T-rail, or any iron about 2 in square, with one end filed to a small bevel and a gauge mark on it. Lay the saw teeth to the mark and strike each tooth with a light hammer to bend it over the bevel.
The mark as given sets a saw for soft wood; draw the saw back a trifle for hard wood.
Source: Popular Mechanics Shop Notes for 1909, p. 896 (N. J. McLean). Picture: the article's drawing.
เริ่มต้น
Unknown
คำแนะนำ
1
1
File the bevel
File the bevel
Take a piece of T-rail about 1 ft long, or any piece of iron about 2 in square. With a file, bevel one end on top, 1/8 in down by 5/8 in back.
วัสดุสำหรับขั้นตอนนี้:
แท่งเหล็ก1 about 1 ft long, about 2 in squareเครื่องมือที่ต้องใช้:
ตะไบโลหะ2
2
Mark the gauge line
Mark the gauge line
On the bevel make a gauge mark 3/16 in down from the top of the bevel (Fig. 1). This mark is for soft wood such as white pine and hemlock.
เครื่องมือที่ต้องใช้:
ตะไบโลหะ3
3
Set the teeth
Set the teeth
Lay the saw on the flat top of the iron with the points of the teeth to the gauge mark. Strike each tooth one smart blow, or two light blows, with a light hammer with a small face; a horseshoeing hammer works well (Fig. 2). For hard wood, draw the saw back a trifle from the mark.
เครื่องมือที่ต้องใช้:
ค้อนเล็ก
เลื่อยมือพิมพ์เขียวนี้สร้าง
CC0 สาธารณสมบัติ
พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต
สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้
