การทำงานร่วมกัน
ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่

Knock-Down Tennis-Court Backstop: Guyed Yellow-Pine Towers on the Ground and Hooked-Down Netting (Boy Mechanic, 1919)
Edward R. Smith's take-down tennis backstop from The Boy Mechanic, Book 3 (1919): two towers about 14 ft high and 50 ft apart, of 4 x 4 and 2 x 4 in yellow pine, stand on brick footings and are guyed with heavy wire; the wire netting hangs from supporting wires on 2 ft crossarms and is hooked to tent stakes at the bottom, so the whole rig comes down between seasons.
ระดับกลาง
About 2 days
คำแนะนำ
1
1
Sizes and wire gauges
Sizes and wire gauges
กำลังโหลดสมุด Jupyter…
2
2
Read The Boy Mechanic, Book 3
Read The Boy Mechanic, Book 3
"Instead of setting the supports in the ground, they are set on the ground, and guyed by a system of wire braces."
3
3
Build the towers and footings
Build the towers and footings
Build two towers about 14 ft high from sound 4 by 4 in and 2 by 4 in yellow-pine timber, to stand 50 ft apart. Make brick foundations, anchored into the ground, for them to stand on, and sink anchors in the ground beyond each end.
วัสดุสำหรับขั้นตอนนี้:
ไม้สนแปรรูป6 ชิ้น
ตะปู1 ชิ้น
สลักเกลียวหัวกลม4 ชิ้น
อิฐ20 ชิ้นเครื่องมือที่ต้องใช้:
เลื่อยมือ
สว่านมือหมุนพร้อมดอก
ค้อน
พลั่ว
ตลับเมตร4
4
Guy the towers
Guy the towers
Fasten end braces of heavy wire (No. 9) to the top of each tower and guy them to the sunken anchors; they carry the weight of the netting and let a ladder lean safely on the guyed end of a tower.
วัสดุสำหรับขั้นตอนนี้:
ลวดเหล็กชุบสังกะสี1 ชิ้นเครื่องมือที่ต้องใช้:
บันไดพาดไม้
คีมปากแบน5
5
Rig the supporting wires and hang the netting
Rig the supporting wires and hang the netting
Run the supporting wires (No. 20 gauge, as printed) between the towers on crossarms of 1 by 1 in wood, 2 ft long, which stop side motion at the top; wire them to the netting and draw them up so it is fairly taut. Add more supporting wires with vertical leaders to the netting to draw its whole length taut. Let the netting run under the towers, held there by wires, nearly to the end guys.
วัสดุสำหรับขั้นตอนนี้:
ไม้ระแนงไม้เนื้ออ่อน2 ชิ้น
ลวดเหล็กชุบสังกะสี1 ชิ้น
ตะแกรงลวดชุบสังกะสี1 ชิ้นเครื่องมือที่ต้องใช้:
บันไดพาดไม้
คีมปากแบน
เลื่อยมือ6
6
Hook down the bottom and mark the guys
Hook down the bottom and mark the guys
Hold the lower edge of the netting down with hooks pinned to the ground by tent stakes, so it can be unhooked to mow. Tie a white flag to each guy wire about 6 ft from the ground so players see it.
วัสดุสำหรับขั้นตอนนี้:
ลวดเหล็กดัด1 ชิ้น
สมอบกเต็นท์12 ชิ้น
ธง2 ชิ้นเครื่องมือที่ต้องใช้:
ค้อน
คีมปากแบน7
7
Season and troubleshooting
Season and troubleshooting
Backstop troubleshooting.
Flow
Loading...
8
8
History and honest limits
History and honest limits
From "A Knock-Down Tennis-Court Backstop" by Edward R. Smith, in **The Boy Mechanic, Book 3**, Popular Mechanics, 1919 (Project Gutenberg 71856; checked on the archive.org scan boymechanic0003unse, p. 189). He gives no netting height or mesh, no tower framing details and no anchor type, and No. 20 gauge for the supporting cables is as printed. The tools and metric figures are ours.
วัสดุ
10- 6 ชิ้นตัวยึดตำแหน่ง
- 1 ชิ้นตัวยึดตำแหน่ง
- 4 ชิ้นตัวยึดตำแหน่ง
- 20 ชิ้นตัวยึดตำแหน่ง
- 2 ชิ้นตัวยึดตำแหน่ง
- 2 ชิ้นตัวยึดตำแหน่ง
- 1 ชิ้นตัวยึดตำแหน่ง
- 1 ชิ้นตัวยึดตำแหน่ง
- 12 ชิ้นตัวยึดตำแหน่ง
- 2 ชิ้นตัวยึดตำแหน่ง
พิมพ์เขียวนี้สร้าง
บลูพริ้นท์ที่เกี่ยวข้อง
บลูพริ้นท์เหล่านี้แบ่งปันความรู้ — เทคนิค วัสดุ หรือหลักการ
CC0 สาธารณสมบัติ
พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต
สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้

