การทำงานร่วมกัน
ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่

Sodium Hydroxide Solution: Normal Caustic Soda, 40 g per Litre (Sutton, 1904)
The standard normal (1 M) caustic soda solution for titration: 40 g NaOH in each litre. Make it a little too strong, check it against normal acid, bring it to exact strength and keep it away from the air, which it takes carbon dioxide from.
Result: normal sodium hydroxide solution, its strength proved by titration.
Source: F. Sutton, A Systematic Handbook of Volumetric Analysis (1904), p. 48. Picture: that page of the book.
เริ่มต้น
Unknown
คำแนะนำ
1
1
Dissolve the caustic soda
Dissolve the caustic soda
Dissolve pure caustic soda in distilled water until the solution has a specific gravity of about 1.05, about 50 g to the litre: a little stronger than normal (40 g to the litre). Expose it to the air as little as possible.
วัสดุสำหรับขั้นตอนนี้:
โซเดียมไฮดรอกไซด์ — เกรดห้องปฏิบัติการ1 about 50 g per litre
น้ำกลั่น1 solventเครื่องมือที่ต้องใช้:
กระบอกตวงมีขีดบอก2
2
Titrate and adjust
Titrate and adjust
Estimate its strength roughly with normal acid and methyl orange. Then titrate 50 ml of it exactly against normal acid and adjust it to exact normal strength. Methyl orange works cold even if the solution has taken up some carbon dioxide; with litmus or phenolphthalein, titrate boiling. Not given: the dilution, implied by the adjustment. Ours: hydrochloric acid as the normal acid; methyl orange as the pH indicator solution.
เครื่องมือที่ต้องใช้:
กรดไฮโดรคลอริก
สารละลายอินดิเคเตอร์ pH
บิวเรต (แก้ว)
ปิเปต3
3
Store it
Store it
Once its strength is settled, keep it in a bottle that shuts out the air, or in full bottles with their glass stoppers lightly greased with vaseline.
เครื่องมือที่ต้องใช้:
ขวดแก้ว (ใส)
วาสลีนวัสดุ
2- 1 about 50 g per litreตัวยึดตำแหน่ง
- 1 solventตัวยึดตำแหน่ง
เครื่องมือที่จำเป็น
7- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
วัสดุจากพิมพ์เขียวที่เชื่อมต่อ
พิมพ์เขียวนี้สร้าง
CC0 สาธารณสมบัติ
พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต
สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้


