ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่

Strontium Ferrite Disc Magnet: 1 : 10 Strontium to Iron Oxide, 1280 °C (Went, Philips 1956, Ex. 26)
A strontium ferrite with much more iron oxide: 0.1 mol strontium carbonate to 1 mol, made as in Example 25 but passed through a 1280 °C furnace in 10 minutes. Went's rod held 1,200 gauss with a coercive force of 3,610 oersted.
Source: J. J. Went, G. W. van Oosterhout and E. W. Gorter (Philips), US 2,762,777 (1956), Example 26. They sintered rods; discs and the magnetising are ours. Picture: ferrite magnets, Omegatron, Wikimedia Commons, CC BY-SA 3.0.
ขั้นสูง
2 days
คำแนะนำ
1
1
Weigh strontium carbonate and iron oxide
Weigh strontium carbonate and iron oxide
Weigh 14.76 g strontium carbonate (0.1 mol) and 159.7 g ferric oxide (1 mol).
วัสดุสำหรับขั้นตอนนี้:
สตรอนเชียมคาร์บอเนต14.76 ก.
เฟอร์ริกออกไซด์159.7 ก.เครื่องมือที่ต้องใช้:
ตราชั่งสองแขน
หน้ากากกรองอากาศ P1002
2
Mill, presinter and mill as in Example 25
Mill, presinter and mill as in Example 25
As in Example 25: grind with alcohol 7 hours, dry at 110 °C, fire in air at 1000 °C for 4 hours, grind again and dry.
เครื่องมือที่ต้องใช้:
หม้อบดลูกเหล็ก
เอทานอล - เกรดห้องปฏิบัติการ 95 %
เตาอบตาก
เตาเผามัฟเฟิล
เบ้าหลอมพร้อมฝา (พอร์ซเลน)
คีมคีบเบ้าหลอม3
3
Press at 1.5 t/cm²
Press at 1.5 t/cm²
Press at 1.5 tonnes per cm² (ours: discs).
เครื่องมือที่ต้องใช้:
เครื่องอัดไฮดรอลิก
แม่พิมพ์อัดแผ่นกลม4
4
Pass through a 1280 °C zone in 10 minutes
Pass through a 1280 °C zone in 10 minutes
Sinter at 1280 °C by passing the pieces through a 10 cm hot zone at 10 mm per minute: 10 minutes in the heat.
เครื่องมือที่ต้องใช้:
เตาเผาแบบท่อ
ถุงมือกันความร้อน5
5
Magnetise the discs
Magnetise the discs
The patent gives no magnetising method. Ours: lay a disc with its faces against the poles of a strong electromagnet, switch the current on, then off. Find which face is north with a compass.
เครื่องมือที่ต้องใช้:
แม่เหล็กไฟฟ้า
เข็มทิศวัสดุ
2- 14.76 ก.ตัวยึดตำแหน่ง
- 159.7 ก.ตัวยึดตำแหน่ง
เครื่องมือที่จำเป็น
14- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
พิมพ์เขียวนี้สร้าง
บลูพริ้นท์ที่เกี่ยวข้อง
บลูพริ้นท์เหล่านี้แบ่งปันความรู้ — เทคนิค วัสดุ หรือหลักการ
CC0 สาธารณสมบัติ
พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต
สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้


