ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
อนาคตสีเขียว
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่

Building a Debris Hut — Emergency Forest Shelter
The gold standard of primitive shelters. No tools, no cordage needed. A well-built debris hut keeps you warm in sub-zero temps using body heat and insulation alone.
Beginner
2-4 hours
คำแนะนำ
1
1
Choose Site
Choose Site
Level ground, slightly elevated. Use natural windbreaks. Avoid dead standing trees. Clear ground of rocks.
2
2
Set Ridgepole
Set Ridgepole
Sturdy branch, 2.5-3m. Prop one end on a stump ~90cm high, other end on the ground. Must hold debris weight.
3
3
Framework
Framework
Lean rib branches at 45° along both sides, spaced 15-20cm. Interior just wide enough for your body. Add horizontal lattice of twigs across the ribs.
การออกแบบ
Cross-section diagram: ridgepole, ribs, lattice, debris layers with thickness annotation 60-90cm
4
4
Pile Debris — Minimum 60cm Thick
Pile Debris — Minimum 60cm Thick
Dead leaves, pine needles, moss, ferns. Push your arm in — if you touch sticks, add more. This is your insulation. 90cm is better.
5
5
Ground Insulation & Door
Ground Insulation & Door
15-20cm of dry leaves inside on the floor. Make a door plug from bundled debris. Seal from inside to trap body heat.
วัสดุ
- •Ridgepole (2.5-3m branch) - 1 pieceตัวยึดตำแหน่ง
- •Rib branches - 30 piecessตัวยึดตำแหน่ง
- •Forest debris - 1 large pileตัวยึดตำแหน่ง
เครื่องมือที่จำเป็น
- None required
CC0 สาธารณสมบัติ
พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต
สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้