การทำงานร่วมกัน
ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่
Test-Tube Hydrometer, Shot-Loaded and Calibrated (Boy Mechanic, 1915)
Penny

สร้างโดย

Penny

14. พฤศจิกายน 2026DK
6
0
0
0
0

Test-Tube Hydrometer, Shot-Loaded and Calibrated (Boy Mechanic, 1915)

A hydrometer for specific gravity made from two test tubes: the small one, weighted with shot set in plaster and corked, floats in the liquid held in the large one, and the depth it sinks is read against marks copied from a bought hydrometer.
เริ่มต้น
An hour plus calibration

คำแนะนำ

1

How it floats

กำลังโหลดสมุด Jupyter…
2

Read the Boy Mechanic

"The specific gravity of any material is the ratio of the weights of equal volumes of the material and water."
3

Mount the jar

Take two test tubes, one able to hold the other. Stand the large one upright in a hole bored in a small block of wood: it holds the liquid.

วัสดุสำหรับขั้นตอนนี้:

หลอดทดลองหลอดทดลอง1 ชิ้น
แผ่นไม้เนื้อแข็งแผ่นไม้เนื้อแข็ง1 ชิ้น

เครื่องมือที่ต้องใช้:

สว่านมือหมุนพร้อมดอกสว่านมือหมุนพร้อมดอก
4

Load the float

Put shot or other heavy metal in the bottom of the small tube until it floats upright: almost wholly under water if it is for liquids heavier than water, only just upright if for lighter ones. Fix the load with a little plaster of Paris.

วัสดุสำหรับขั้นตอนนี้:

หลอดทดลองหลอดทดลอง1 ชิ้น
แท่งตะกั่วแท่งตะกั่ว1 ชิ้น
ปูนปลาสเตอร์ปูนปลาสเตอร์1 ชิ้น
5

Seal it

Push a small cork into the open end and seal it with shellac, or with resin or sealing wax melted over it with a hot soldering iron.

วัสดุสำหรับขั้นตอนนี้:

จุกไม้ก๊อกจุกไม้ก๊อก1 ชิ้น
น้ำมันเคลือบเชลแล็กน้ำมันเคลือบเชลแล็ก1 ชิ้น
ยางสนยางสน1 ชิ้น

เครื่องมือที่ต้องใช้:

หัวแร้งบัดกรีหัวแร้งบัดกรี
6

Mark the water line

Float it in the large tube filled with pure water (rain water will do, distilled is better) and file a small mark level with the surface. In lighter liquids the mark sinks below the surface; in heavier ones it rises above.

วัสดุสำหรับขั้นตอนนี้:

น้ำกลั่นน้ำกลั่น1 ชิ้น

เครื่องมือที่ต้องใช้:

ตะไบ (ตะไบมือ)ตะไบ (ตะไบมือ)
7

Calibrate

Float your tube and a borrowed hydrometer in the same liquid and mark your tube to match its readings. Starting with a heavy liquid, add water little by little; both float lower each time, giving more marks.

วัสดุสำหรับขั้นตอนนี้:

น้ำกลั่นน้ำกลั่น1 ชิ้น

เครื่องมือที่ต้องใช้:

ตะไบ (ตะไบมือ)ตะไบ (ตะไบมือ)
8

Troubleshooting

Hydrometer troubleshooting.

Flow

Loading...
9

History and honest limits

From **The Boy Mechanic, Book 2** (Popular Mechanics, 1915), p. 456 (checked on the archive.org scan boymechanicbook200chic2). Lead ingot stands in for his shot; the float numbers are our example.

วัสดุ

8

เครื่องมือที่จำเป็น

3

บลูพริ้นท์ที่เกี่ยวข้อง

บลูพริ้นท์เหล่านี้แบ่งปันความรู้ — เทคนิค วัสดุ หรือหลักการ

CC0 สาธารณสมบัติ

พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต

สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้

การสนทนา

(0)

เข้าสู่ระบบ เพื่อร่วมการสนทนา

กำลังโหลดความคิดเห็น...