ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่

The Ring-Set Lemon Squeezer: A Bowl Held in Its Handle by a Screwed Ring
A squeezer's bowl set loose in a wooden handle works free, and one fixed in for good cannot be taken out to clean or replace.
James L. Jensen of Brooklyn, New York, received US 104,159, dated 14 June 1870, for "the best means of inserting a lemon-squeezer in its handles", "forming an annular flange on the cup, but below the top thereof, placing it upon the open shoulder of the handle, and detachably fastening thereon an independent annular ring flush with the top." The bowl's flange rests in a stepped recess cut in the handle's face; a wooden ring fits between the bowl's top and the recess wall and is held by screws.
This rung works out what the ring's screws carry, then makes hinged hardwood handles with a tin bowl set in a stepped recess and held by a screwed ring, and squeezes lemons with it.
ระดับกลาง
About 4 hours
คำแนะนำ
1
1
The ring's screws
The ring's screws
กำลังโหลดสมุด Jupyter…
2
2
A hinged squeezer before it
A hinged squeezer before it
The embedded blueprint sets a sprung button in one of two hinged levers. Jensen sets the bowl itself into the handle so it can be taken out.
3
3
Read US 104,159
Read US 104,159
"I make the bowls A with a horizontal flange, B, on the outside, near the top, and provide an annular recess in the face of the handles C, to which they are to be attached. This recess is deeper than the thickness of the rim B, and it is widened on the plane of the top of the said rim when resting in the bottom. In this widened part a ring of wood, D, is secured by screws E fitting snugly between the top of the cup and the wall of the recess, and upon the top of the rim B."
"This arrangement makes a very simple, cheap, and efficient fastening, and is applicable for securing said cups into wood or metal for any other purpose."
4
4
Make the handles and set the bowl
Make the handles and set the bowl
**Bowl.** Cut the bottom 3 cm off a clean tin can and punch holes in its base. Solder a ring of tinplate round its outside 5 mm below its top as the flange B.
**Handles.** Cut two hardwood handles, one with a round end for the bowl, and join them at the other end of that round with a butt hinge. In the lower handle's round end, cut a hole the bowl drops through, and round it a stepped recess: a shoulder for the flange to rest on, widened above it.
**Ring.** Cut a hardwood ring that fits the widened part, between the bowl's top and the recess wall, and bears on the flange. Screw it down with three screws into the handle.
**Press.** Screw a hardwood dome to the upper handle so it closes into the bowl.
**Test.** Squeeze lemons over a glass. Then unscrew the ring, lift the bowl out, clean it and set it back.
วัสดุสำหรับขั้นตอนนี้:
กระป๋องดีบุก1 ชิ้น
แผ่นเหล็กชุบดีบุก1 ชิ้น
ตะกั่วบัดกรีท่อน้ำแบบไร้ตะกั่ว1 ชิ้น
ฟลักซ์1 ชิ้น
แผ่นไม้เนื้อแข็ง1 ชิ้น
ท่อนไม้เนื้อแข็ง1 ชิ้น
บานพับประตู1 ชิ้น
สกรูไม้8 ชิ้น
เลมอน2 ชิ้นเครื่องมือที่ต้องใช้:
กรรไกรตัดแผ่นโลหะ
ตะปู
ค้อน
หัวแร้งบัดกรี
เลื่อยมือ
ชุดสิ่วไม้
สว่านไร้สาย
ชุดดอกสว่าน
ตะไบหยาบ
ชุดไขควง
มีดครัว
แก้วน้ำ
ถุงมือหนังสำหรับทำงาน5
5
A bowl that rocks, leaks or will not come out
A bowl that rocks, leaks or will not come out
Ring-set lemon squeezer troubleshooting.
Flow
Loading...
6
6
History and honest limits
History and honest limits
**James L. Jensen** of Brooklyn, Kings County, New York, received US 104,159, dated 14 June 1870. His handles C carried the recess into which the bowls were attached, and he held the fastening applicable for securing cups in wood or metal for other purposes. His claim is the annular flange below the cup's top, the open circular recess in the handle, and the independent annular ring detachably fastened.
**Honest limits.** A tin can with a soldered flange stands in for his bowl. The notebook gives the most a screw could carry; its forces, lengths and screw counts are examples. Your squeezing and cleaning are the result.
วัสดุ
9- 1 ชิ้นตัวยึดตำแหน่ง
- 1 ชิ้นตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- 1 ชิ้นตัวยึดตำแหน่ง
- 1 ชิ้นตัวยึดตำแหน่ง
- 1 ชิ้นตัวยึดตำแหน่ง
- 1 ชิ้นตัวยึดตำแหน่ง
- 8 ชิ้นตัวยึดตำแหน่ง
- 2 ชิ้นตัวยึดตำแหน่ง
เครื่องมือที่จำเป็น
13- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- 2 vendors sell this, none ship to you yetตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- 1 vendor sell this, none ship to you yetตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
บลูพริ้นท์ที่เกี่ยวข้อง
บลูพริ้นท์เหล่านี้แบ่งปันความรู้ — เทคนิค วัสดุ หรือหลักการ

The Spring-Button Lemon Squeezer: A Button That Gives Way So the Rind Wraps Round It
โดย YourGrandma
งานไม้
18
0
0
0
0
0

The Porcelain-Lined Lemon Squeezer: Cast-Iron Handles, Porcelain Where the Juice Runs
โดย Mary
เครื่องปั้นดินเผา
15
0
0
0
0
0

The Shears-Cup Lemon Squeezer: Two Cups on Crossed Handles, a Slotted Recess for the Juice
โดย TheChef
งานโลหะ
12
0
0
0
0
0
CC0 สาธารณสมบัติ
พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต
สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้