การทำงานร่วมกัน
ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่
Thompson (Nlaka'pamux) Snowshoes: One-Piece Maple or Yew Frames Steamed in Pairs, Netted with Twisted Raw Deer-Hide (Teit, 1900)
Woody

สร้างโดย

Woody

15. พฤศจิกายน 2026NO
10
0
0
0
0

Thompson (Nlaka'pamux) Snowshoes: One-Piece Maple or Yew Frames Steamed in Pairs, Netted with Twisted Raw Deer-Hide (Teit, 1900)

Snowshoes of the Thompson (Nlaka'pamux) people, from James Teit: each frame a single rod of mountain maple or yew, the two frames tied together and their points spread with a short stick so they steam into a matching pair with turned-up toes, then netted with fine, slightly twisted strings of raw deer-hide. Rounded, wide-meshed shoes for steep mountains and wet snow.
ระดับกลาง
Two or three days

คำแนะนำ

1

Read Teit

"The frame is made of one piece of mountain-maple or yew wood, and the network is of raw deer-hide cut into fine strings and slightly twisted."
2

Shape two frame rods

For each shoe take one rod of mountain maple or yew and shave it even (ours: about 2.5 m long and 2.5 cm thick for a rounded shoe of roughly 90 x 40 cm).

วัสดุสำหรับขั้นตอนนี้:

เสาไม้สดเสาไม้สด1 ชิ้น

เครื่องมือที่ต้องใช้:

มีดมีด
มีดสองมือมีดสองมือ
3

Bend and steam as a pair

Bend each rod into the frame shape, tie the two frames together and push a short stick between their points to spread them, so the toes turn up. Steam them in that position until they keep the shape. Ours: over a kettle of boiling water under a cover, then let them dry tied.

วัสดุสำหรับขั้นตอนนี้:

เชือกเชือก1 ชิ้น
น้ำน้ำ1 ชิ้น

เครื่องมือที่ต้องใช้:

กาต้มน้ำเหล็กหล่อกาต้มน้ำเหล็กหล่อ
หลุมไฟหลุมไฟ
มีดมีด
4

Cut and twist the netting

Cut raw deer-hide into fine strings and twist them slightly. Ours: soak them so they shrink tight as they dry.

วัสดุสำหรับขั้นตอนนี้:

แถบหนังดิบแถบหนังดิบ1 ชิ้น
น้ำน้ำ1 ชิ้น

เครื่องมือที่ต้องใช้:

มีดมีด
5

Net the shoe

Lash in cross-bars and net the frame. The Lower Thompsons used rounded frames with rather wide meshes, good on steep slopes and in moist snow; the upper bands made them longer and netted them more closely. Ours: follow the ordinary snowshoe, Fig. 242.

วัสดุสำหรับขั้นตอนนี้:

แถบหนังดิบแถบหนังดิบ1 ชิ้น

เครื่องมือที่ต้องใช้:

เหล็กหมาด (สว่านเจาะรูมือ)เหล็กหมาด (สว่านเจาะรูมือ)
มีดมีด
6

Troubleshooting

Snowshoe troubleshooting.

Flow

Loading...
7

History and honest limits

From James Teit, *The Thompson Indians of British Columbia*, **Memoirs of the American Museum of Natural History, Jesup North Pacific Expedition** vol. I part IV (1900), pp. 256-257 and Figs. 239-242 (checked on the archive.org scan cihm_16242). He names six netting forms, among them the 'owl sole' and 'magpie sole', and a Shuswap type four to five feet long and pointed at both ends. Sizes, the steaming setup and the netting order are ours.

วัสดุ

4
  • ตัวยึดตำแหน่ง
  • 1 ชิ้น
    ตัวยึดตำแหน่ง
  • 2 ชิ้น
    ตัวยึดตำแหน่ง
  • ตัวยึดตำแหน่ง

เครื่องมือที่จำเป็น

5

CC0 สาธารณสมบัติ

พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต

สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้

การสนทนา

(0)

เข้าสู่ระบบ เพื่อร่วมการสนทนา

กำลังโหลดความคิดเห็น...