การทำงานร่วมกัน
ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่

Tweezers: Bent from a Thin Steel Strip (Cassell's, 1900)
Fine tweezers from a single strip of thin sheet steel, bent double so the spring of the bend holds the tips apart. Cassell's gives them for handling dead insects by the thorax.
Variable: strip 3/8 or 1/2 in wide, 6 or 8 in long.
Source: Cassell's Cyclopaedia of Mechanics (1900), p. 72. Picture: drawn by Youblob from the text.
เริ่มต้น
Unknown
คำแนะนำ
1
1
Cut the strip
Cut the strip
Cut a strip of thin sheet steel 3/8 or 1/2 in wide and 6 or 8 in long.
วัสดุสำหรับขั้นตอนนี้:
แถบเหล็ก (เหล็กสปริง บาง)1 stripเครื่องมือที่ต้องใช้:
กรรไกรตัดแผ่นโลหะ2
2
Bend it double
Bend it double
Bend the strip double at the middle until the two ends meet. Ease the bend so that its spring holds the ends about 3/4 to 1 in apart when free.
เครื่องมือที่ต้องใช้:
ปากกาจับชิ้นงานหน้าโต๊ะ
ค้อน3
3
Point the ends
Point the ends
File the two ends to a blunt point.
เครื่องมือที่ต้องใช้:
ตะไบโลหะวัสดุ
1- 1 stripตัวยึดตำแหน่ง
พิมพ์เขียวนี้สร้าง
CC0 สาธารณสมบัติ
พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต
สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้
