การทำงานร่วมกัน
ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่
Uncapping Knife: the Bingham Knife (Hasluck, 1905)
Forge

สร้างโดย

Forge

4. พฤศจิกายน 2026NO
15
0
0
1
0

Uncapping Knife: the Bingham Knife (Hasluck, 1905)

The Bingham honey knife: a trowel-like blade of good saw steel, sharpened all round from the underside, riveted to a cranked 3/8 in tang so the handle stands about an inch above the comb. Hasluck warns it is a job only for a maker with the means for that kind of work. Source: P. N. Hasluck, Beehives and Bee Keepers' Appliances (1905), p. 155. Picture: the book's Fig. 152.
ขั้นสูง
Unknown

คำแนะนำ

1

Shape the blade

Cut a blade of good saw steel 6 or 7 in long and 2 to 3 in wide to the pattern of Fig. 152, like a mason's trowel.

วัสดุสำหรับขั้นตอนนี้:

แถบเหล็กสปริงแถบเหล็กสปริง1 6-7 x 2-3 in

เครื่องมือที่ต้องใช้:

สกัดเย็นสกัดเย็น
ตะไบโลหะตะไบโลหะ
2

Make the tang

Make a tang of 3/8 in iron or steel: point one end to fit the handle and flatten the other so it can be riveted to the blade.

วัสดุสำหรับขั้นตอนนี้:

เหล็กเส้นกลมเหล็กกล้าละมุนเหล็กเส้นกลมเหล็กกล้าละมุน1 3/8 in

เครื่องมือที่ต้องใช้:

เตาตีเหล็กเตาตีเหล็ก
ทั่งทั่ง
ค้อนค้อน
ตะไบโลหะตะไบโลหะ
3

Rivet and set the tang

Rivet the flattened end to the blade with two rivets countersunk into the underside of the blade and ground flush. Bend the tang so that with the blade flat on a board the handle stands about 1 in above it.

วัสดุสำหรับขั้นตอนนี้:

หมุดย้ำเหล็กหมุดย้ำเหล็ก2 ชิ้น

เครื่องมือที่ต้องใช้:

สว่านมือสว่านมือ
ชุดดอกลบมุมรูชุดดอกลบมุมรู
ค้อนค้อน
หินลับแบบหมุนหินลับแบบหมุน
4

Handle and edge

Fit the handle on the pointed end of the tang. Sharpen the blade all round like a chisel, from the underside only.

วัสดุสำหรับขั้นตอนนี้:

วัสดุที่ไม่ทราบวัสดุที่ไม่ทราบ1 handle, material not given

เครื่องมือที่ต้องใช้:

หินลับแบบหมุนหินลับแบบหมุน

วัสดุ

4

เครื่องมือที่จำเป็น

8
  • ตัวยึดตำแหน่ง
  • ตัวยึดตำแหน่ง
  • ตัวยึดตำแหน่ง
  • ตัวยึดตำแหน่ง
  • ตัวยึดตำแหน่ง
  • ตัวยึดตำแหน่ง
  • ตัวยึดตำแหน่ง
  • ตัวยึดตำแหน่ง

CC0 สาธารณสมบัติ

พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต

สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้

การสนทนา

(0)

เข้าสู่ระบบ เพื่อร่วมการสนทนา

กำลังโหลดความคิดเห็น...