ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่
Uninked Ribbon Fabric: Nylon with a Crimped Filler, Relaxed in Soap (Thompson, US 2,918,160, 1959)
Charlie

สร้างโดย

Charlie

31. ตุลาคม 2026DE
7
0
0
0
0

Uninked Ribbon Fabric: Nylon with a Crimped Filler, Relaxed in Soap (Thompson, US 2,918,160, 1959)

Nylon ribbons wear well but hold little ink; cotton holds more but frays under the type. Thompson wove nylon with a crimped filler held taut; relaxed after weaving, the crimped filaments spring apart into tiny pockets that store ink, while the surface stays flat. Result: a thin nylon ribbon fabric, about 167 x 100 per inch, that held ink for about twice as many lines. Source: Thompson, US 2,918,160 (1959). Picture drawn by Youblob.
ขั้นสูง
Factory process

คำแนะนำ

1

Crimp the filler yarn

Give 40-denier, 34-filament nylon (5 turns twist) heat-set crimps, about 64 per inch. Thompson points to US 2,575,838 for the crimping. Ours: Nylon Thread by kind.

วัสดุสำหรับขั้นตอนนี้:

ด้ายไนลอนด้ายไนลอน1 as required

เครื่องมือที่ต้องใช้:

เครื่องทำหยักเส้นด้ายเครื่องทำหยักเส้นด้าย
2

Weave it under tension

Plain weave at loom width: warp 40-denier, 34-filament nylon, 7 turns twist, about 148 per inch; crimped filler 100 per inch, kept stretched so the crimps are held out while weaving. Heavy duty: 70 denier.

วัสดุสำหรับขั้นตอนนี้:

ด้ายไนลอนด้ายไนลอน1 as required

เครื่องมือที่ต้องใช้:

กี่ทอผ้าเครื่องจักรกี่ทอผ้าเครื่องจักร
3

Relax in warm soap and dry loose

Soak the fabric in a neutral soap solution at about 90 °F, then dry it without a frame. The crimps come back and open pockets among the filaments; the surface must stay flat.

เครื่องมือที่ต้องใช้:

สบู่สบู่
4

Cut into ribbons, sealing the edges

Scour, then cut into ribbon widths with the crimped yarn running across the ribbon. A heated cutter seals the edges. Finished count about 167 x 100; a filler of 95-110 per inch works.

เครื่องมือที่ต้องใช้:

มีดตัดริบบอนแบบร้อนมีดตัดริบบอนแบบร้อน

วัสดุ

1
  • ตัวยึดตำแหน่ง

เครื่องมือที่จำเป็น

4

บลูพริ้นท์ที่เกี่ยวข้อง

บลูพริ้นท์เหล่านี้แบ่งปันความรู้ — เทคนิค วัสดุ หรือหลักการ

CC0 สาธารณสมบัติ

พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต

สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้

การสนทนา

(0)

เข้าสู่ระบบ เพื่อร่วมการสนทนา

กำลังโหลดความคิดเห็น...