การทำงานร่วมกัน
ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่
Wash Bottle: a Laboratory Wash Bottle with a Slit Valve (Boy Mechanic, 1915)
Charlie

สร้างโดย

Charlie

4. พฤศจิกายน 2026DE
14
0
0
0
0

Wash Bottle: a Laboratory Wash Bottle with a Slit Valve (Boy Mechanic, 1915)

A wide-mouthed bottle with a three-tube stopper that squirts a steady stream of water for rinsing glassware and washing precipitates. Blow into one tube to pressurise it; a slit rubber valve holds the pressure, and your thumb on a relief tube starts and stops the jet at once. Source: The Boy Mechanic, Book 2 (1915), p. 458. Unknown: sizes. Picture: the book's sketch.
เริ่มต้น
Unknown

คำแนะนำ

1

Bore the stopper

Fit a stopper to a large-mouthed bottle and bore three holes through it for the tubes.

วัสดุสำหรับขั้นตอนนี้:

ขวดแก้ว (ใส)ขวดแก้ว (ใส)1 large mouth
จุกยางจุกยาง1 ชิ้น

เครื่องมือที่ต้องใช้:

ที่เจาะจุกไม้ก๊อกที่เจาะจุกไม้ก๊อก
2

Make the tubes

Use brass or glass tubes. Bend the nozzle tube E so it reaches the bottom and points out over the side (sketch); the air tube A and relief tube D only pass through the stopper.

วัสดุสำหรับขั้นตอนนี้:

หลอดแก้วหลอดแก้ว3 ชิ้น

เครื่องมือที่ต้องใช้:

หัวเป่าแก้วตั้งโต๊ะหัวเป่าแก้วตั้งโต๊ะ
3

Fit the slit valve

On the lower end of air tube A fit a thick piece of rubber tubing B, stoppered at its bottom end, and cut a slit C in its side: blown air opens it, and it closes again to hold the pressure. Push the three tubes through the stopper and fit it in the bottle. To use: fill with water, blow into A, then close D with your thumb; water jets steadily from E and stops the moment the thumb lifts.

วัสดุสำหรับขั้นตอนนี้:

ท่อยางท่อยาง1 thick, short piece

เครื่องมือที่ต้องใช้:

มีดคัตเตอร์งานประดิษฐ์มีดคัตเตอร์งานประดิษฐ์

วัสดุ

4
  • ตัวยึดตำแหน่ง
  • 1 ชิ้น
    ตัวยึดตำแหน่ง
  • ตัวยึดตำแหน่ง
  • 1 thick, short piece
    ตัวยึดตำแหน่ง

เครื่องมือที่จำเป็น

3

CC0 สาธารณสมบัติ

พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต

สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้

การสนทนา

(0)

เข้าสู่ระบบ เพื่อร่วมการสนทนา

กำลังโหลดความคิดเห็น...