การทำงานร่วมกัน
ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่
Wedging Table: Plaster-Topped with a Cutting Wire (Binns, 1910)
Woody

สร้างโดย

Woody

4. พฤศจิกายน 2026NO
9
0
0
0
0

Wedging Table: Plaster-Topped with a Cutting Wire (Binns, 1910)

The potter's wedging table Binns taught: a strong table with a 30 by 20 in top of two-inch plank, edged to make a trough filled with plaster, and a fine brass wire stretched diagonally from a post on one side for cutting the clay. Clay is cut on the wire and slapped down on the plaster, fifteen or twenty times, until it is even; wet the plaster if it stiffens the clay too fast. Source: C. F. Binns, The Potter's Craft (1910), p. 79. Picture: the book's text.
เริ่มต้น
Unknown

คำแนะนำ

1

Make the top

Build a strong table whose top, about 30 by 20 in, is of two-inch plank. Nail a raised edge 2 in high firmly to the sides to form a trough.

วัสดุสำหรับขั้นตอนนี้:

แผ่นไม้แปรรูปแผ่นไม้แปรรูป1 two-inch plank, about 30 x 20 in
แผ่นกระดานแผ่นกระดาน1 raised edge, 2 in high
ตะปูเหล็กตะปูเหล็ก1 ชิ้น

เครื่องมือที่ต้องใช้:

เลื่อยมือเลื่อยมือ
ค้อนค้อน
2

Pour the plaster

Fill the trough with plaster and let it harden.

วัสดุสำหรับขั้นตอนนี้:

ปูนปลาสเตอร์ปูนปลาสเตอร์1 ชิ้น

เครื่องมือที่ต้องใช้:

ค้อนค้อน
3

Fit the post and wire

Fasten an upright post in the centre of one side and stretch a fine brass wire from its top to the other side of the table, making a diagonal. The worker stands on the side opposite the post.

วัสดุสำหรับขั้นตอนนี้:

วัสดุที่ไม่ทราบวัสดุที่ไม่ทราบ1 upright post, material not given
ลวดทองเหลืองเส้นเล็กลวดทองเหลืองเส้นเล็ก1 fine brass wire
ตะปูเหล็กตะปูเหล็ก1 ชิ้น

เครื่องมือที่ต้องใช้:

ค้อนค้อน
เลื่อยมือเลื่อยมือ

วัสดุ

6

เครื่องมือที่จำเป็น

2
  • ตัวยึดตำแหน่ง
  • ตัวยึดตำแหน่ง

พิมพ์เขียวนี้สร้าง

CC0 สาธารณสมบัติ

พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต

สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้

การสนทนา

(0)

เข้าสู่ระบบ เพื่อร่วมการสนทนา

กำลังโหลดความคิดเห็น...