ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่
Wing Nut from an Ordinary Nut and a Riveted Wire Staple (Boy Mechanic, 1915)
Forge

สร้างโดย

Forge

14. พฤศจิกายน 2026NO
7
0
0
0
0

Wing Nut from an Ordinary Nut and a Riveted Wire Staple (Boy Mechanic, 1915)

A thumb-turned nut of any size you need: drill through two opposite corners of an ordinary nut and rivet in a wire staple that stands up as a handle, high enough to clear the bolt end.
เริ่มต้น
Twenty minutes each

คำแนะนำ

1

Read the Boy Mechanic

"A hole was drilled through opposite corners of each nut and a staple made of wire riveted in the holes."
2

Drill the corners

Hold the nut in a vise and drill a small hole through each of two opposite corners, parallel to the bolt hole. (His sketch shows a square nut; using a hex nut is ours.)

วัสดุสำหรับขั้นตอนนี้:

น็อตหกเหลี่ยมน็อตหกเหลี่ยม1 ชิ้น

เครื่องมือที่ต้องใช้:

ปากกาจับชิ้นงานหน้าโต๊ะปากกาจับชิ้นงานหน้าโต๊ะ
สว่านมือสว่านมือ
3

Bend the staple

Bend a piece of stiff wire into a U-shaped staple whose legs fit the holes and whose loop stands high enough to clear the end of the bolt.

วัสดุสำหรับขั้นตอนนี้:

ลวดเหล็กดัดลวดเหล็กดัด1 ชิ้น

เครื่องมือที่ต้องใช้:

คีมปากแบนคีมปากแบน
เลื่อยตัดเหล็กเลื่อยตัดเหล็ก
4

Rivet it

Push the staple legs through the holes and rivet the ends over on the underside of the nut.

เครื่องมือที่ต้องใช้:

ค้อนค้อน
ปากกาจับชิ้นงานหน้าโต๊ะปากกาจับชิ้นงานหน้าโต๊ะ
5

Troubleshooting

Wing nut troubleshooting.

Flow

Loading...
6

History and honest limits

From **The Boy Mechanic, Book 2** (Popular Mechanics, 1915), p. 182, by Clarence L. Orcutt (checked on the archive.org scan boymechanicbook200chic2). No sizes are given; the tools are ours.

วัสดุ

2

เครื่องมือที่จำเป็น

5

บลูพริ้นท์ที่เกี่ยวข้อง

บลูพริ้นท์เหล่านี้แบ่งปันความรู้ — เทคนิค วัสดุ หรือหลักการ

CC0 สาธารณสมบัติ

พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต

สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้

การสนทนา

(0)

เข้าสู่ระบบ เพื่อร่วมการสนทนา

กำลังโหลดความคิดเห็น...