SANAT
GÜZELLİK & SAĞLIK
ZANAAT
KÜLTÜR & TARİH
EĞLENCE
ÇEVRE
YİYECEK & İÇECEK
TERS MÜHENDİSLİK
BİLİMLER
SPOR
TEKNOLOJİ
GİYİLEBİLİR ÜRÜNLER
Activated Alumina: Aluminium Trihydrate Heated at 350 °C While Hot Air Carries the Steam Away (Derr, Alcoa, US 2,015,593)
Charlie

Oluşturan

Charlie

30. Ekim 2026DE
1
0
0
0
0

Activated Alumina: Aluminium Trihydrate Heated at 350 °C While Hot Air Carries the Steam Away (Derr, Alcoa, US 2,015,593)

Heating aluminium trihydrate drives out its water and leaves a porous alumina that soaks up moisture. Alcoa's Derr found it works much better when the steam is carried away at once, by a stream of hot air or by a vacuum, instead of lingering in the bed. Result: activated alumina that takes up 14 % of its weight in water from air (8 % made the old way), up to 16 % if washed first in 3 % sulphuric acid. Source: Derr, US 2,015,593 (Alcoa, 1935). Not given: times, bed depth, air rate, amounts. Picture drawn by Youblob.
Orta
1 day

Talimatlar

1

Wash the trihydrate in 3 % sulphuric acid

Before heating, wash the aluminium trihydrate in water containing about 3 % by weight of sulphuric acid. Derr calls this very desirable but not essential: it raises the capacity by about 1-2 %. Ours: stir in a beaker.

Bu adım için malzemeler:

Alüminyum hidroksitAlüminyum hidroksit1 as required

Gerekli aletler:

Seyreltik sülfürik asitSeyreltik sülfürik asit
SuSu
Borosilikat BeherBorosilikat Beher
Cam Karıştırma ÇubuğuCam Karıştırma Çubuğu
2

Lay it in beds in a chamber

Put the material in beds or layers in a chamber that gas can be drawn through. Ours: a tube furnace.

Gerekli aletler:

Tüp FırınTüp Fırın
3

Draw air at 350 °C through the bed

Draw air (or combustion gas) heated to about 350 °C through the bed and out of the chamber in a continuous flow, so the steam leaves at once. Temperature: 250-800 °C works, 350-400 °C is best; above 800 °C the alumina changes and loses capacity.

Gerekli aletler:

Hava üfleyiciHava üfleyici
PirometrePirometre
4

Or heat it under a partial vacuum

Instead of hot air, close the chamber, keep a partial vacuum in it and heat above 250 °C and below 800 °C; 300-400 °C on a large scale. The steam passes quickly out of the chamber.

Gerekli aletler:

Vakum pompasıVakum pompası
PirometrePirometre
5

Keep it dry

The product takes up about 14 % of its weight of water from air, 16 % if acid-washed. Ours: store it in an airtight container until use.

Gerekli aletler:

Hava geçirmez saklama kaplarıHava geçirmez saklama kapları

Malzemeler

1

Gerekli Aletler

9

İlgili Blueprint'ler

Bu blueprint'ler bilgi paylaşır — teknikler, malzemeler veya ilkeler

CC0 Kamu Malı

Bu plan CC0 lisansıyla yayınlanmıştır. İzin almadan kopyalayabilir, değiştirebilir, dağıtabilir ve herhangi bir amaçla kullanabilirsiniz.

Planı üzerinden ürün satın alarak Maker'ı destekleyin, böylece Maker Komisyonu Satıcılar tarafından belirlenen komisyonu kazanırlar veya bu Planın yeni bir versiyonunu oluşturun ve gelir paylaşımı için kendi Planınıza bağlantı olarak ekleyin.

Tartışma

(0)

Giriş yapın tartışmaya katılmak için

Yorumlar yükleniyor...