İşbirliği
SANAT
GÜZELLİK & SAĞLIK
ZANAAT
KÜLTÜR & TARİH
EĞLENCE
ÇEVRE
YİYECEK & İÇECEK
TERS MÜHENDİSLİK
BİLİMLER
SPOR
TEKNOLOJİ
GİYİLEBİLİR ÜRÜNLER
Aluminium Oxide Abrasive Grit: Alundum by Jacobs's Process (Stansfield, 1914)
Charlie

Oluşturan

Charlie

4. Kasım 2026DE
10
0
0
0
0

Aluminium Oxide Abrasive Grit: Alundum by Jacobs's Process (Stansfield, 1914)

Alundum, the artificial corundum made at Niagara Falls by the Norton Company: bauxite, calcined to drive off its water, is fused in an electric arc furnace with about 5 per cent carbon, which reduces its iron, silicon and titanium to metal nodules; the fused alumina cools slowly into a hard crystalline mass that is crushed and sized as abrasive grit. Bauxite melts near 2,000 °C and could not be melted commercially without the electric furnace. Source: A. Stansfield, The Electric Furnace, 2nd ed. (1914), pp. 357-358. Picture: the book's Fig. 143, the Higgins alundum furnace.
İleri
Unknown

Talimatlar

1

Calcine the bauxite

Calcine the bauxite in a rotary kiln to drive off its combined water.

Bu adım için malzemeler:

BoksitBoksit1 adet

Gerekli aletler:

Döner fırınDöner fırın
2

Fuse in the arc furnace

Strike arcs between the electrodes and the carbon lining of the furnace bottom, then feed the calcined bauxite, with about 5 per cent carbon, in round the arcs; it melts and in time carries the current between the two arcs. Lower the water-cooled shell as the fused alundum builds up; the lower part solidifies as it fills.

Bu adım için malzemeler:

KarbonKarbon1 about 5 per cent

Gerekli aletler:

Elektrik ark ocağıElektrik ark ocağı
3

Cool slowly

When the shell is full, lift it with its contents off the base, put another shell in place, and let the alundum cool slowly so it grows into a hard, tough crystalline mass.

Gerekli aletler:

Elektrik ark ocağıElektrik ark ocağı
4

Crush, separate and size

Break up and crush the mass, separate the nodules of reduced metal mechanically, and size the grains for use as an abrasive.

Gerekli aletler:

Kaya kırıcıKaya kırıcı
Elek takımı (kademeli göz)Elek takımı (kademeli göz)

Malzemeler

2
  • 1 adet
    Yer Tutucu
  • 1 about 5 per cent
    Yer Tutucu

Gerekli Aletler

4

CC0 Kamu Malı

Bu plan CC0 lisansıyla yayınlanmıştır. İzin almadan kopyalayabilir, değiştirebilir, dağıtabilir ve herhangi bir amaçla kullanabilirsiniz.

Planı üzerinden ürün satın alarak Maker'ı destekleyin, böylece Maker Komisyonu Satıcılar tarafından belirlenen komisyonu kazanırlar veya bu Planın yeni bir versiyonunu oluşturun ve gelir paylaşımı için kendi Planınıza bağlantı olarak ekleyin.

Tartışma

(0)

Giriş yapın tartışmaya katılmak için

Yorumlar yükleniyor...