SANAT
GÜZELLİK & SAĞLIK
ZANAAT
KÜLTÜR & TARİH
EĞLENCE
ÇEVRE
YİYECEK & İÇECEK
YEŞİL GELECEK
TERS MÜHENDİSLİK
BİLİMLER
SPOR
TEKNOLOJİ
GİYİLEBİLİR ÜRÜNLER
Building a Qanun — The Plucked Zither with Microtone Levers
Woody

Oluşturan

Woody

3. Temmuz 2026NO
0
0
0
0
0

Building a Qanun — The Plucked Zither with Microtone Levers

Build a qanun: a flat trapezoidal zither of many string courses, plucked with finger picks — the plucked cousin of the hammered santur. Its secret is a bank of little levers (mandal) that raise or lower each course by a microtone, flipped mid-performance to change the mode. A serious maker build in the plucked zither and how a lever re-tunes a string in an instant.
Orta
Several hours over several sessions

Talimatlar

1

A zither you pluck, with levers

The qanun is a flat trapezoidal zither with dozens of string courses, plucked with picks on your fingers. Rows of little levers let you re-tune any course by a microtone in an instant to change the mode.
2

Build the trapezoidal box

Build a shallow trapezoidal box with a thin wooden soundboard. On a real qanun part of the board is covered with fish-skin, over which the bridge stands.

Bu adım için malzemeler:

Baltic Birch Plywood (1/8 inch, 12x12, 10-Pack)Baltic Birch Plywood (1/8 inch, 12x12, 10-Pack)1 adet
Dry Softwood BoardDry Softwood Board1 adet
PVA Wood GluePVA Wood Glue1 adet

Gerekli aletler:

HacksawHacksaw
3

Set the pins and string it

Fit tuning pins along one slanted side and hitch pins on the other, and string the instrument in courses of three strings tuned together — a full qanun has around seventy strings.

Bu adım için malzemeler:

Tuning PegsTuning Pegs9 adet
Steel Music Wire 0.032"Steel Music Wire 0.032"1 adet

Gerekli aletler:

AwlAwl
4

Stand the bridge

Stand a long wooden bridge across the skin-covered part of the soundboard so all the courses press down on it, feeding their vibration into the skin and box.

Gerekli aletler:

Sloyd Carving KnifeSloyd Carving Knife
5

Fit the mandal levers

At the tuning end, fit a bank of small metal levers (mandal) under each course. Flipping a lever shortens the vibrating length of that course by a tiny, fixed amount — raising it a microtone.

Bu adım için malzemeler:

Bronze WireBronze Wire1 adet

Gerekli aletler:

Metal FileMetal File
6

Tune the courses

Tune every course to the scale with its pins, then set the mandal levers for the mode (maqam) you want to play.
7

Play with finger picks

Wear a pick on each index finger and pluck the courses, the two hands answering each other across the strings.
8

Flip a lever, change the note

Mid-tune, flip a mandal lever to shift a course up or down a microtone. This is how a qanun player slides between maqamat without stopping to re-tune.
9

Compendium — the lever that re-tunes a string

The qanun is a plucked box zither — the same idea as the langspil, but with many courses of strings across a wide trapezoidal soundboard, and plucked with finger picks rather than a hammer, which makes it the exact plucked twin of the hammered santur that shares its shape. A string's pitch depends on its length, tension and mass, and the qanun's mandal levers are a beautifully simple way to change one of these on the fly: each lever, when flipped up, presses down near one end of a course and shortens its vibrating length by a small fixed amount, raising that course's pitch by a microtone; flip it back and the full length returns. Because Arabic and Turkish music uses many microtonal notes and shifts between modes (maqamat) within a single piece, a qanun carries a whole bank of these levers, several per course, so the player can nudge individual notes up or down by tiny steps in an instant without ever re-tuning by ear. The bridge stands on a patch of stretched skin so the strings drive a membrane as well as the soundboard, giving the qanun its bright, ringing shimmer. Its cousins are the santur, the langspil and every box zither, and its lever trick is a mechanical relative of the harp's pedals and the guitar's capo — all quick ways to retune strings without turning a peg.

Malzemeler

6

Gerekli Aletler

4

You can swap these in

Can't get one of the materials? Swap it for an equivalent — these work just as well.

İlgili Blueprint'ler

Bu blueprint'ler bilgi paylaşır — teknikler, malzemeler veya ilkeler

CC0 Kamu Malı

Bu plan CC0 lisansıyla yayınlanmıştır. İzin almadan kopyalayabilir, değiştirebilir, dağıtabilir ve herhangi bir amaçla kullanabilirsiniz.

Planı üzerinden ürün satın alarak Maker'ı destekleyin, böylece Maker Komisyonu Satıcılar tarafından belirlenen komisyonu kazanırlar veya bu Planın yeni bir versiyonunu oluşturun ve gelir paylaşımı için kendi Planınıza bağlantı olarak ekleyin.

Tartışma

(0)

Giriş yapın tartışmaya katılmak için

Yorumlar yükleniyor...