İşbirliği
SANAT
GÜZELLİK & SAĞLIK
ZANAAT
KÜLTÜR & TARİH
EĞLENCE
ÇEVRE
YİYECEK & İÇECEK
TERS MÜHENDİSLİK
BİLİMLER
SPOR
TEKNOLOJİ
GİYİLEBİLİR ÜRÜNLER

Barrel-Stave Hammock: Notched Staves Held by Ropes Twined Round Their Ends (Boy Mechanic, 1913)
A hammock of barrel staves, "more comfortable than one would think", from The Boy Mechanic (1913): smooth staves notched at the ends and strung side by side on ropes, which are gathered and tied to two trees. It can be left out in the rain.
The book gives no sizes: the length of the staves sets the width of the bed.
Başlangıç
About 2 hours
Talimatlar
1
1
Read The Boy Mechanic
Read The Boy Mechanic
"A hammock made of barrel staves is more comfortable than one would think, considering the nature of the material employed in making it."
2
2
Choose and smooth the staves
Choose and smooth the staves
Select good, smooth barrel staves, enough laid side by side to make the hammock as long as you are tall (our rule). Sandpaper them thoroughly; he says this makes a great improvement.
Bu adım için malzemeler:
Fıçı tahtası12 adet
Zımpara Kağıdı1 adet3
3
Notch the ends
Notch the ends
Cut half circles out of the edges of each stave near both ends, as at AA in his drawing, so the ropes lie in them. Mark them at the same place on every stave so the staves line up. Boring a hole on the edge line and sawing it in half is our way of cutting them.
Gerekli aletler:
Kurşun kalem
Kol matkabı ve ucu
El Testeresi4
4
String the staves
String the staves
Lay the staves side by side and pass the ropes round their ends through the notches, twining them between the staves as at B, at both ends. The weight then hangs on four ropes at each end, so small ropes such as clothes lines will do.
Bu adım için malzemeler:
Çamaşır ipi1 adet5
5
Hang it
Hang it
Gather the ropes at each end and tie them round two trees or posts, leaving the hammock a little slack so the bed curves as in the drawing.
Bu adım için malzemeler:
Çamaşır ipi1 adet6
6
Troubleshooting
Troubleshooting
Hammock troubleshooting.
Flow
Loading...
7
7
History and honest limits
History and honest limits
From **The Boy Mechanic**, edited by H. H. Windsor, Popular Mechanics, Chicago, 1913, p. 75, "Barrel-Stave Hammock", sent in by H.G.M. of St. Louis (Project Gutenberg 12655). He gives no sizes or number of staves; the count, the length rule and the way of cutting the notches are ours.
Malzemeler
3- 12 adetYer Tutucu
- 1 adetYer Tutucu
- 1 adetYer Tutucu
Gerekli Aletler
3- 1 vendor sell this, none ship to you yetYer Tutucu
- Yer Tutucu
- Yer Tutucu
Bu planla yapılan
İlgili Blueprint'ler
Bu blueprint'ler bilgi paylaşır — teknikler, malzemeler veya ilkeler
CC0 Kamu Malı
Bu plan CC0 lisansıyla yayınlanmıştır. İzin almadan kopyalayabilir, değiştirebilir, dağıtabilir ve herhangi bir amaçla kullanabilirsiniz.
Planı üzerinden ürün satın alarak Maker'ı destekleyin, böylece Maker Komisyonu Satıcılar tarafından belirlenen komisyonu kazanırlar veya bu Planın yeni bir versiyonunu oluşturun ve gelir paylaşımı için kendi Planınıza bağlantı olarak ekleyin.


