İşbirliği
SANAT
GÜZELLİK & SAĞLIK
ZANAAT
KÜLTÜR & TARİH
EĞLENCE
ÇEVRE
YİYECEK & İÇECEK
TERS MÜHENDİSLİK
BİLİMLER
SPOR
TEKNOLOJİ
GİYİLEBİLİR ÜRÜNLER

Caliper: Spring-Wire Calipers with a Sliding Loop (Boy Mechanic, 1919)
Quick calipers from one length of spring wire, bent double into two legs, with a loop of heavy wire round the middle that slides along to set the opening.
Variable: points turned in to gauge outside diameters, or out to gauge bores.
Source: The Boy Mechanic, Book 3 (1919), p. 373. Picture: the book's sketch.
Başlangıç
Unknown
Talimatlar
1
1
Bend the legs
Bend the legs
Take about 15 in of spring wire and bend it as in the sketch: a round bend at one end and two legs whose tips turn inward (for outside diameters) or outward (for inside ones).
Bu adım için malzemeler:
Yay çeliği tel1 15 inGerekli aletler:
Sac makası
Tezgah Mengenesi2
2
Fit the sliding loop
Fit the sliding loop
Fasten a loop of heavy wire round the middle so it slides back and forth along both legs. Sliding it toward the tips closes the calipers; sliding it back lets them spring open.
Bu adım için malzemeler:
Demir tel1 heavy wire loopGerekli aletler:
Sac makasıGerekli Aletler
2- Yer Tutucu
- Yer Tutucu
Bu planla yapılan
CC0 Kamu Malı
Bu plan CC0 lisansıyla yayınlanmıştır. İzin almadan kopyalayabilir, değiştirebilir, dağıtabilir ve herhangi bir amaçla kullanabilirsiniz.
Planı üzerinden ürün satın alarak Maker'ı destekleyin, böylece Maker Komisyonu Satıcılar tarafından belirlenen komisyonu kazanırlar veya bu Planın yeni bir versiyonunu oluşturun ve gelir paylaşımı için kendi Planınıza bağlantı olarak ekleyin.
