İşbirliği
SANAT
GÜZELLİK & SAĞLIK
ZANAAT
KÜLTÜR & TARİH
EĞLENCE
ÇEVRE
YİYECEK & İÇECEK
TERS MÜHENDİSLİK
BİLİMLER
SPOR
TEKNOLOJİ
GİYİLEBİLİR ÜRÜNLER

Clay Tool Set: Potter's Turning Tools, Turning Stick and Rib (Binns, The Potter's Craft, 1910)
The potter's set for turning (trimming) leather-hard pots on the wheel, as Binns taught it: soft steel tools the potter bends and files to shape, a turning stick and upright board to steady the hand, and wooden ribs cut to the shape of the inside of a pot.
Result: a set of turning tools, a turning stick and board, and ribs.
Source: C. F. Binns, The Potter's Craft (1910), pp. 86-88 and 179. Unknown: the tool sizes. Picture: Fig. 19 of the book.
Başlangıç
Unknown
Talimatlar
1
1
Bend and file the turning tools
Bend and file the turning tools
Make the turning tools of soft steel strip: bend each near its end and file the edge to suit. Make broad tools filed to a curve, for finishing concave surfaces; one or two narrow tools with a curved edge, which cut faster; and a small square tool. Keep the filing at its own bench so steel dust does not get into the clay. Ours: mild steel flat bar. Not given: the strip sizes.
Bu adım için malzemeler:
Yumuşak Çelik Lama1 turning toolsGerekli aletler:
Demir Testeresi
Çekiç
Örs
Metal Eğe2
2
Make the board and turning stick
Make the board and turning stick
Cut a soft pine board 8 or 10 inches wide and 2 feet high, to stand upright at the back of the wheel frame opposite the potter, screwed on or set in a socket so it can be removed. Make the turning stick from a broomstick with a sharpened nail in its end; its point presses into the board at any height and the hand holding the tool rests on it, like a painter's mahl-stick. Ours: a wooden dowel for the broomstick.
Bu adım için malzemeler:
Çam tahta1 board support
Ahşap kavela1 turning stick
Demir Çiviler1 stick pointGerekli aletler:
Demir Testeresi
Metal Eğe
Çekiç3
3
Cut the ribs
Cut the ribs
Cut a piece of wood, called a rib, to the exact shape of the inside of the pot to be made; it smooths the inside while the wheel turns. Make one for each shape. Ours: hardwood.
Bu adım için malzemeler:
Sert ağaç kalası1 ribsGerekli aletler:
Demir Testeresi
Metal EğeMalzemeler
5- 1 turning toolsYer Tutucu
- 1 board supportYer Tutucu
- 1 turning stickYer Tutucu
- 1 stick pointYer Tutucu
- 1 ribsYer Tutucu
Bağlı Plan Malzemeleri

%10 Atıf
Mild Steel Bar Stock Forged from an Ingot
Forge tarafından
Modern
47
0
0
0
5
0

%10 Atıf
Pine Boards with a Chainsaw Mill
Woody tarafından
Ağaç işleri
47
0
0
0
1
0

%10 Atıf
Riven Hardwood Dowels with a Dowel Plate
Woody tarafından
Ağaç işleri
59
0
0
0
1
0

%10 Atıf
Forging Iron Nails by Hand — Drawing, Cutting, and Heading
Forge tarafından
Çiviler
63
0
0
0
3
0
Bu planla yapılan
CC0 Kamu Malı
Bu plan CC0 lisansıyla yayınlanmıştır. İzin almadan kopyalayabilir, değiştirebilir, dağıtabilir ve herhangi bir amaçla kullanabilirsiniz.
Planı üzerinden ürün satın alarak Maker'ı destekleyin, böylece Maker Komisyonu Satıcılar tarafından belirlenen komisyonu kazanırlar veya bu Planın yeni bir versiyonunu oluşturun ve gelir paylaşımı için kendi Planınıza bağlantı olarak ekleyin.
