İşbirliği
SANAT
GÜZELLİK & SAĞLIK
ZANAAT
KÜLTÜR & TARİH
EĞLENCE
ÇEVRE
YİYECEK & İÇECEK
TERS MÜHENDİSLİK
BİLİMLER
SPOR
TEKNOLOJİ
GİYİLEBİLİR ÜRÜNLER
Copper Concentrate: Sulphide Ore Stamped, Jigged and Tabled at the Anaconda Mill (Richards, Ore Dressing 1903)
Charlie

Oluşturan

Charlie

1. Kasım 2026DE
15
0
0
0
0

Copper Concentrate: Sulphide Ore Stamped, Jigged and Tabled at the Anaconda Mill (Richards, Ore Dressing 1903)

Copper sulphide ore is too lean to smelt as mined. At the Anaconda mill it was screened, crushed under steam stamps, sorted by settling speed in rising water, and run over jigs and slime tables, where the heavy copper minerals sink and the light quartz and feldspar wash away. Result: concentrates of 12 to 20 % copper; 100 tons of ore gave 50 to 75 tons. The mill handled 2,500 to 2,700 tons a day. Source: Robert H. Richards, Ore Dressing vol. II (1903), pp. 984-986, Mill No. 42, Anaconda Copper Mining Company. Not given: the copper in the ore, water per ton. Picture drawn by Youblob.
İleri
1 day

Talimatlar

1

Sort the ore

In the mine, pick the ore by hand into rich ore (straight to the smelter), hard concentrating ore and soft concentrating ore. The ore holds chalcocite, chalcopyrite, pyrite, enargite and blende in quartz and decomposed feldspar; the aim is to save the copper and silver without the zinc.

Bu adım için malzemeler:

Sülfürlü bakır cevheriSülfürlü bakır cevheri100 tons
2

Screen and pick

Pass each kind over vibrating grizzlies with 1 in spaces; hand-pick the oversize for rich ore. Screen the undersize in trommels: 6.35 mm round holes for hard ore; 12.7 mm then 6.35 mm for soft ore.

Gerekli aletler:

Sınıflandırma eleğiSınıflandırma eleği
TromelTromel
3

Crush under steam stamps

Crush the coarse hard ore under steam stamps with screens of 4.76 x 9.52 mm slots, the soft ore under stamps with 12.7 mm round holes. Richards notes that steam stamps were later given up for these ores.

Gerekli aletler:

Dövme DeğirmeniDövme Değirmeni
SuSu
4

Classify and jig

Jig the coarse soft ore on 1-sieve Harz jigs. Send all fine ore to hydraulic classifiers with three spigots; each spigot feeds its own row of 2-sieve Collom jigs. The heavy concentrate is drawn from the jigs; middlings are crushed again.

Gerekli aletler:

Cevher jigiCevher jigi
Hidrolik sınıflandırıcıHidrolik sınıflandırıcı
SuSu
5

Table the slimes and collect

Run the classifier overflow over convex revolving slime tables. Gather all concentrates and settlings for the smelter: 12 to 20 % copper, 50 to 75 tons from 100 tons of ore. Tailings keep 1 1/4 to 2 % copper.

Gerekli aletler:

Döner şlam masasıDöner şlam masası
Çökeltme tankıÇökeltme tankı

Malzemeler

1

Gerekli Aletler

8

CC0 Kamu Malı

Bu plan CC0 lisansıyla yayınlanmıştır. İzin almadan kopyalayabilir, değiştirebilir, dağıtabilir ve herhangi bir amaçla kullanabilirsiniz.

Planı üzerinden ürün satın alarak Maker'ı destekleyin, böylece Maker Komisyonu Satıcılar tarafından belirlenen komisyonu kazanırlar veya bu Planın yeni bir versiyonunu oluşturun ve gelir paylaşımı için kendi Planınıza bağlantı olarak ekleyin.

Tartışma

(0)

Giriş yapın tartışmaya katılmak için

Yorumlar yükleniyor...