İşbirliği
SANAT
GÜZELLİK & SAĞLIK
ZANAAT
KÜLTÜR & TARİH
EĞLENCE
ÇEVRE
YİYECEK & İÇECEK
TERS MÜHENDİSLİK
BİLİMLER
SPOR
TEKNOLOJİ
GİYİLEBİLİR ÜRÜNLER
Ferrosilicon: Silica, Carbon and Scrap Iron Smelted with Bituminous Coal in an Electric Furnace (Furness, US 1,284,645)
Carbon pulls the oxygen out of silica in an electric furnace, and the silicon alloys with iron in the charge. Furness swapped part of the coke or charcoal for lumps of bituminous coal, which keep the charge open and poorly conducting, so the electrodes sit deep and the heat stays in.
Result: ferrosilicon, tapped from the bottom of the furnace.
Source: Furness, US 1,284,645 (1918). Not given: silicon content, iron proportion. Picture drawn by Youblob.
İleri
Factory process
Talimatlar
1
1
Weigh the charge
Weigh the charge
Crushed quartzite (silica), charcoal or coke, and scrap steel or iron ore. Carbon: 24 parts per 60 parts of silica in theory, slightly more in practice; more if iron ore is used. Ours: quartz sand, iron filings, charcoal.
Bu adım için malzemeler:
Kuvars Kumu60 parts
Demir talaşı1 as requiredGerekli aletler:
Odun Kömürü
Eşit kollu terazi2
2
Add lumps of bituminous coal
Add lumps of bituminous coal
Supply 20-40 % of the total carbon as bituminous coal (10 % or more works). It can go in coarse, lumps up to fist size, keeping the charge open to the gas.
Gerekli aletler:
Taş kömürü3
3
Smelt with deeply bedded electrodes
Smelt with deeply bedded electrodes
Feed the charge into an electric furnace so the electrodes stay buried deep in it. The silica is reduced, carbon monoxide burns off at the top, and the alloy collects at the bottom. Ours: electric arc furnace.
Gerekli aletler:
Elektrik ark ocağı4
4
Tap the ferrosilicon
Tap the ferrosilicon
Tap the molten ferrosilicon from the bottom of the furnace and let it set.
Gerekli aletler:
Elektrik ark ocağıMalzemeler
2- 60 partsYer Tutucu
- 1 as requiredYer Tutucu
Gerekli Aletler
4- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
Bu planla yapılan
CC0 Kamu Malı
Bu plan CC0 lisansıyla yayınlanmıştır. İzin almadan kopyalayabilir, değiştirebilir, dağıtabilir ve herhangi bir amaçla kullanabilirsiniz.
Planı üzerinden ürün satın alarak Maker'ı destekleyin, böylece Maker Komisyonu Satıcılar tarafından belirlenen komisyonu kazanırlar veya bu Planın yeni bir versiyonunu oluşturun ve gelir paylaşımı için kendi Planınıza bağlantı olarak ekleyin.