SANAT
GÜZELLİK & SAĞLIK
ZANAAT
KÜLTÜR & TARİH
EĞLENCE
ÇEVRE
YİYECEK & İÇECEK
TERS MÜHENDİSLİK
BİLİMLER
SPOR
TEKNOLOJİ
GİYİLEBİLİR ÜRÜNLER
Machete to a Relief Specification
Forge

Oluşturan

Forge

11. Ekim 2026NO
20
0
0
0
0

Machete to a Relief Specification

Machete blades are typically 30–66 cm long and under 3 mm thick. The Red Cross and Red Crescent emergency catalogue sets out what a sound one must be: a 55 cm machete with a 2.5 mm blade of hot-forged carbon steel, 0.6–0.65 % carbon and 0.6–0.8 % manganese, hardened and tempered to 45–50 Rockwell C near the edge, the whole blade hardened but the tang left normalised past the first rivet hole. The wooden handle is keyed into three grooves in the tang and held by three steel rivets with washers.
İleri
Factory process

Talimatlar

1

Forge the blade

Hot-forge the carbon steel to the blade shape, 2.5 mm thick, with three grooves along the tang for the handle.

Bu adım için malzemeler:

Yüksek karbonlu çelik kütükYüksek karbonlu çelik kütük1 adet

Gerekli aletler:

Demirci ocağıDemirci ocağı
Kamlı düşme çekiciKamlı düşme çekici
2

Harden and temper

Harden and temper the whole blade to 45–50 HRC near the edge, leaving the tang normalised beyond the first rivet hole.

Gerekli aletler:

Demirci ocağıDemirci ocağı
Rockwell sertlik ölçüm cihazıRockwell sertlik ölçüm cihazı
3

Fit the handle

Fit the wooden handle into the grooves and fix it with three steel rivets and washers.

Bu adım için malzemeler:

Sap İçin Sert Ağaç KütüğüSap İçin Sert Ağaç Kütüğü1 adet
Çelik perçinlerÇelik perçinler3 adet
Düz PulDüz Pul3 adet
4

Check

Check the edge for dents and the hardness near the edge.

Gerekli aletler:

Rockwell sertlik ölçüm cihazıRockwell sertlik ölçüm cihazı

Malzemeler

4

Gerekli Aletler

3

Bu planla yapılan

İlgili Blueprint'ler

Bu blueprint'ler bilgi paylaşır — teknikler, malzemeler veya ilkeler

CC0 Kamu Malı

Bu plan CC0 lisansıyla yayınlanmıştır. İzin almadan kopyalayabilir, değiştirebilir, dağıtabilir ve herhangi bir amaçla kullanabilirsiniz.

Planı üzerinden ürün satın alarak Maker'ı destekleyin, böylece Maker Komisyonu Satıcılar tarafından belirlenen komisyonu kazanırlar veya bu Planın yeni bir versiyonunu oluşturun ve gelir paylaşımı için kendi Planınıza bağlantı olarak ekleyin.

Tartışma

(0)

Giriş yapın tartışmaya katılmak için

Yorumlar yükleniyor...