SANAT
GÜZELLİK & SAĞLIK
ZANAAT
KÜLTÜR & TARİH
EĞLENCE
ÇEVRE
YİYECEK & İÇECEK
TERS MÜHENDİSLİK
BİLİMLER
SPOR
TEKNOLOJİ
GİYİLEBİLİR ÜRÜNLER

Foundry Hand Ladle: Iron Bowl, Long Shank, Clay Lining
A foundry ladle carries molten metal from the furnace to the mould. Small hand ladles look like a kitchen ladle, with a long handle to keep the heat away, a refractory lining inside the metal shell, and a lip to pour from by tilting. Raise an iron bowl with lips, rivet on a long forged shank with a wooden grip, and line it with fire clay.
The picture: a moulder pouring into sand moulds from a hand ladle (Safe Foundry Practice, 1920).
Orta
A day, then drying
Talimatlar
1
1
Raise the bowl
Raise the bowl
Cut an iron sheet disc about 24 cm across (our size) and raise it over the forming stake into a deep bowl, annealing as it stiffens. Pull a pouring lip on each side of the rim.
Bu adım için malzemeler:
Demir levha (dövülmüş)1 adet
Odun Kömürü2 as requiredGerekli aletler:
Pergel
Sac makası
Biçimlendirme zımbası
Şişirme çekici
Demirci ocağı
Kaynak eldivenleri
Koruyucu gözlük2
2
Shank
Shank
Forge a wrought iron shank about 90 cm long (ours), flattened at one end into a strap that fits the bowl.
Bu adım için malzemeler:
Dövme demir mil1 m
Odun Kömürü2 as requiredGerekli aletler:
Demirci ocağı
Örs
Enine keski başlı çekiç
Demirci kerpeteni
Kaynak eldivenleri
Koruyucu gözlük3
3
Rivet and grip
Rivet and grip
Drill and rivet the strap to the bowl. Turn a wooden grip, bore it, and drive it onto the far end of the shank.
Bu adım için malzemeler:
Demir perçinler3 adet
Sert ağaç çıtası1 adetGerekli aletler:
El matkabı
Enine keski başlı çekiç
Sırıklı torna4
4
Line it
Line it
Mix refractory clay stiff with water and press a lining about 1 cm thick inside the bowl, smoothing it round the lips. Dry it slowly, then warm the ladle through before the first pour so no damp is left.
Bu adım için malzemeler:
Refrakter Kil1 kg
Su0.3 litreGerekli aletler:
Demirci ocağı
Kaynak eldivenleri
Koruyucu gözlük5
5
How much metal it holds
How much metal it holds
Jupyter defteri yükleniyor…
Malzemeler
7- 1 adetYer Tutucu
- 2 as requiredYer Tutucu
- Yer Tutucu
- 3 adetYer Tutucu
- 1 adetYer Tutucu
- 1 kgYer Tutucu
- 0.3 litreYer Tutucu
Gerekli Aletler
12- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
Bu planla yapılan
İlgili Blueprint'ler
Bu blueprint'ler bilgi paylaşır — teknikler, malzemeler veya ilkeler
CC0 Kamu Malı
Bu plan CC0 lisansıyla yayınlanmıştır. İzin almadan kopyalayabilir, değiştirebilir, dağıtabilir ve herhangi bir amaçla kullanabilirsiniz.
Planı üzerinden ürün satın alarak Maker'ı destekleyin, böylece Maker Komisyonu Satıcılar tarafından belirlenen komisyonu kazanırlar veya bu Planın yeni bir versiyonunu oluşturun ve gelir paylaşımı için kendi Planınıza bağlantı olarak ekleyin.


