SANAT
GÜZELLİK & SAĞLIK
ZANAAT
KÜLTÜR & TARİH
EĞLENCE
ÇEVRE
YİYECEK & İÇECEK
TERS MÜHENDİSLİK
BİLİMLER
SPOR
TEKNOLOJİ
GİYİLEBİLİR ÜRÜNLER

Garden Fork: Four Forged Tines on an Ash D-Grip Handle
A garden fork has a square-shouldered head with usually four short, sturdy tines, flatter, thicker and closer together than a pitchfork's, on a short, stout wooden handle with a D- or T-grip; it loosens and turns soil like a spade. Forge four tines, weld them to a shoulder bar with a socket, and fit an ash D-grip handle.
The picture: old digging forks with ash D-grip handles.
İleri
Two days
Talimatlar
1
1
Forge the tines
Forge the tines
Draw four tines of tool steel about 25 cm long (our size), square at the root and tapering to a point, slightly flattened.
Bu adım için malzemeler:
Sekizgen takım çeliği çubuk1 kg
Odun Kömürü4 as requiredGerekli aletler:
Demirci ocağı
Örs
Enine keski başlı çekiç
Demirci kerpeteni
Kaynak eldivenleri
Koruyucu gözlük2
2
Shoulder and socket
Shoulder and socket
Forge a wrought iron shoulder bar as wide as the head, with a tapered socket drawn up from its middle. Forge-weld the four tines along the bar at even spacing (step 5).
Bu adım için malzemeler:
Dövme demir çubuk2 adet
Odun Kömürü4 as requiredGerekli aletler:
Demirci ocağı
Örs
Balyoz
Örs kesme keskisi
Demirci kerpeteni
Kaynak eldivenleri
Koruyucu gözlük3
3
Temper and true
Temper and true
Line the tines up straight and parallel, harden the tine points in water and temper them to blue (our temper), and file them clean.
Bu adım için malzemeler:
Su10 litreGerekli aletler:
Demirci ocağı
Su verme kovası
Demirci kerpeteni
Metal Eğe
Kaynak eldivenleri
Koruyucu gözlük4
4
Handle
Handle
Make an ash D-grip handle as for the spade, drive it into the socket, drill through and rivet. Oil the handle.
Bu adım için malzemeler:
Dişbudak kütüğü2 adet
Demir perçinler2 adet
Bezir Yağı0.05 litreGerekli aletler:
Yarma bıçağı (froe)
Yontma tezgâhı
İki Saplı Yontma Bıçağı
El matkabı
Enine keski başlı çekiç5
5
Tine spacing
Tine spacing
Jupyter defteri yükleniyor…
Malzemeler
7- Yer Tutucu
- 4 as requiredYer Tutucu
- 2 adetYer Tutucu
- 10 litreYer Tutucu
- 2 adetYer Tutucu
- 2 adetYer Tutucu
- 0.05 litreYer Tutucu
Gerekli Aletler
14- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
- Yer Tutucu
Bu planla yapılan
İlgili Blueprint'ler
Bu blueprint'ler bilgi paylaşır — teknikler, malzemeler veya ilkeler
CC0 Kamu Malı
Bu plan CC0 lisansıyla yayınlanmıştır. İzin almadan kopyalayabilir, değiştirebilir, dağıtabilir ve herhangi bir amaçla kullanabilirsiniz.
Planı üzerinden ürün satın alarak Maker'ı destekleyin, böylece Maker Komisyonu Satıcılar tarafından belirlenen komisyonu kazanırlar veya bu Planın yeni bir versiyonunu oluşturun ve gelir paylaşımı için kendi Planınıza bağlantı olarak ekleyin.

