SANAT
GÜZELLİK & SAĞLIK
ZANAAT
KÜLTÜR & TARİH
EĞLENCE
ÇEVRE
YİYECEK & İÇECEK
TERS MÜHENDİSLİK
BİLİMLER
SPOR
TEKNOLOJİ
GİYİLEBİLİR ÜRÜNLER
Glass Retort: a Blown Bulb with a Long Neck Bent Down
Bubbles

Oluşturan

Bubbles

14. Ekim 2026IT
26
0
0
0
0

Glass Retort: a Blown Bulb with a Long Neck Bent Down

A retort is the old distilling vessel: a round glass bulb whose long neck bends down to a receiver, so the neck itself condenses the vapour. Alchemists used it, and so did Lavoisier and Berzelius before condensers. Blow a bulb on a long tube, bend the tube down in a wide flame, and add a corked filling hole on top. The picture: a mid-19th-century glass retort with a stoppered filling hole (Wellcome Collection).
İleri
Two hours, plus annealing

Talimatlar

1

Blow the bulb on a long tube

Close one end of a long tube, gather glass and blow a round bulb, as for a flask. Keep the rest of the tube full length for the neck.

Bu adım için malzemeler:

Cam Boru SetiCam Boru Seti1 adet

Gerekli aletler:

Tezgâh üstü cam üfleme şalomasıTezgâh üstü cam üfleme şaloması
Koruyucu gözlükKoruyucu gözlük
Isıya Dayanıklı EldivenIsıya Dayanıklı Eldiven
2

Bend the neck down

Warm a long stretch of the tube just past the bulb in a wide, soft flame, turning it, until it bends under its own weight. Bend it smoothly so the neck slopes down at a sharp angle, without kinking.

Gerekli aletler:

Tezgâh üstü cam üfleme şalomasıTezgâh üstü cam üfleme şaloması
Isıya Dayanıklı EldivenIsıya Dayanıklı Eldiven
3

Filling hole

Heat a spot on the top of the bulb, blow it out into a small bubble, break it off and open it into a short collar with the jacks for a cork.

Gerekli aletler:

Tezgâh üstü cam üfleme şalomasıTezgâh üstü cam üfleme şaloması
Jacks (cam ustası kerpeteni)Jacks (cam ustası kerpeteni)
Mantar tıpalarMantar tıpalar
4

Cut and anneal

Cut the neck end square, fire-polish it, and anneal the retort in the kiln, cooling slowly.

Gerekli aletler:

Elmas Uçlu ÇizecekElmas Uçlu Çizecek
Tezgâh üstü cam üfleme şalomasıTezgâh üstü cam üfleme şaloması
Fırın (Kiln)Fırın (Kiln)
5

Neck length for cooling

Jupyter defteri yükleniyor…

Malzemeler

1

Gerekli Aletler

7

Bu planla yapılan

İlgili Blueprint'ler

Bu blueprint'ler bilgi paylaşır — teknikler, malzemeler veya ilkeler

CC0 Kamu Malı

Bu plan CC0 lisansıyla yayınlanmıştır. İzin almadan kopyalayabilir, değiştirebilir, dağıtabilir ve herhangi bir amaçla kullanabilirsiniz.

Planı üzerinden ürün satın alarak Maker'ı destekleyin, böylece Maker Komisyonu Satıcılar tarafından belirlenen komisyonu kazanırlar veya bu Planın yeni bir versiyonunu oluşturun ve gelir paylaşımı için kendi Planınıza bağlantı olarak ekleyin.

Tartışma

(0)

Giriş yapın tartışmaya katılmak için

Yorumlar yükleniyor...